Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Albany-Schenectady-Troy, NY make a median of $76,650 a year, or about $36.85 an hour. The range runs from $54K at the entry level to $106K for experienced workers. Adjusted for local prices (RPP 99.57), that's roughly $76,981 in purchasing power. A 2-bedroom apartment runs $1,702/month, about 34% of take-home, which is tight.
So what does $77K get you in Albany-Schenectady-Troy?
Groceries, utilities, transportation, and healthcare scaled from national averages by Albany-Schenectady-Troy’s Regional Price Parity (99.57). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Albany-Schenectady-Troy
Albany-Schenectady-Troy sits well above the national pay line for computer numerically controlled tool programmers, local pay runs about 13% higher than the U.S. median of $68K. Rent runs $1,702/month for a 2-bedroom (HUD FMR), taking 34.8% of the median take-home. That's within the 30% rule, though not by much. Cost of living (RPP 99.57) is near the national average, so spending patterns here track the typical American budget fairly closely. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Albany-Schenectady-Troy, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| New York-Newark-Jersey City | $71K | $63K |
| Rochester | $67K | $69K |
| Buffalo-Cheektowaga | $71K | $74K |
| Syracuse | $66K | $69K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Albany-Schenectady-Troy, NY
Entry-level computer numerically controlled tool programmers (10th percentile) start around $54K. Mid-career wages sit at $77K. Top earners bring in $106K or more, a $52K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Albany-Schenectady-Troy numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Albany-Schenectady-Troy?
It’s a stretch — at the median salary of $77K, rent takes 34.8% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,702/month. The 30% guideline puts the comfortable ceiling at roughly $1,500/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Albany-Schenectady-Troy?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $54K/year. Take-home on that works out to about $3,232/month. At HUD’s $1,702/month FMR, rent would take 53% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Albany-Schenectady-Troy?
Local pay is 13% above the national median — $77K here vs. $68K nationally.
How does Albany-Schenectady-Troy compare to the national average for computer numerically controlled tool programmers?
Albany-Schenectady-Troy pays $77K median vs. the U.S. average of $68K — that’s +13%. After adjusting for local cost of living (RPP 99.57), the purchasing-power equivalent is $77K — still ahead of the national median.
How much do computer numerically controlled tool programmers make in Albany-Schenectady-Troy, NY?
The median is $76,650 a year, that works out to about $37 an hour. But the range is wide: entry-level workers start around $53,870, and experienced computer numerically controlled tool programmers can clear $105,510. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $77K enough to live in Albany-Schenectady-Troy?
On that salary, you'd take home roughly $4,892/month after taxes. A 2-bedroom here rents for about $1,702/month, which eats 34.8% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Albany-Schenectady-Troy?
Albany-Schenectady-Troy has a Regional Price Parity of 99.57 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $76,981 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.