Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Davenport-Moline-Rock Island, IA-IL make a median of $46,020 a year, or about $22.13 an hour. The range runs from $39K at the entry level to $77K for experienced workers. Cost of living is below average (RPP 89.08), which stretches that salary to about $51,661 in buying power. A 2-bedroom apartment runs $1,143/month, about 36.4% of take-home, which is tight.
So what does $46K get you in Davenport-Moline-Rock Island?
Groceries, utilities, transportation, and healthcare scaled from national averages by Davenport-Moline-Rock Island’s Regional Price Parity (89.08). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Davenport-Moline-Rock Island
Pay for computer numerically controlled tool programmers in Davenport-Moline-Rock Island runs about 32% below the U.S. median of $68K. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,143/month, which is 37.3% of the median worker's take-home, past the 30% guideline most planners use. Regional Price Parity sits at 89.08 (national = 100), meaning everyday costs run about 11% cheaper here. Your dollar stretches further than the headline salary suggests. That combination, below-market pay with high housing costs, makes this a financially demanding market for computer numerically controlled tool programmerss.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Davenport-Moline-Rock Island, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Des Moines-West Des Moines | $68K | $74K |
| Waterloo-Cedar Falls | $60K | $69K |
| Dubuque | $56K | $64K |
| Cedar Rapids | $59K | $66K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Davenport-Moline-Rock Island, IA-IL
Entry-level computer numerically controlled tool programmers (10th percentile) start around $39K. Mid-career wages sit at $46K. Top earners bring in $77K or more, a $38K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Davenport-Moline-Rock Island numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Davenport-Moline-Rock Island?
It’s a stretch — at the median salary of $46K, rent takes 37.3% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,143/month. The 30% guideline puts the comfortable ceiling at roughly $900/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Davenport-Moline-Rock Island?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $39K/year. Take-home on that works out to about $2,349/month. At HUD’s $1,143/month FMR, rent would take 49% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Davenport-Moline-Rock Island?
Local pay runs 32% below the national median — $46K here vs. $68K nationally. Cost of living is 11% below the national average, which narrows that gap in real purchasing power.
How does Davenport-Moline-Rock Island compare to the national average for computer numerically controlled tool programmers?
Davenport-Moline-Rock Island pays $46K median vs. the U.S. average of $68K — that’s -32%. After adjusting for local cost of living (RPP 89.08), the purchasing-power equivalent is $52K — below the national median.
How much do computer numerically controlled tool programmers make in Davenport-Moline-Rock Island, IA-IL?
The median is $46,020 a year, that works out to about $22 an hour. But the range is wide: entry-level workers start around $39,150, and experienced computer numerically controlled tool programmers can clear $77,420. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $46K enough to live in Davenport-Moline-Rock Island?
On that salary, you'd take home roughly $3,068/month after taxes. A 2-bedroom here rents for about $1,143/month, which eats 37.3% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Davenport-Moline-Rock Island?
Davenport-Moline-Rock Island has a Regional Price Parity of 89.08 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $51,661 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.