Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Des Moines-West Des Moines, IA make a median of $67,650 a year, or about $32.53 an hour. The range runs from $52K at the entry level to $95K for experienced workers. Cost of living is below average (RPP 91.7), which stretches that salary to about $73,773 in buying power. Rent on a 2-bedroom averages $1,318/month, or 29.7% of estimated take-home pay.
So what does $68K get you in Des Moines-West Des Moines?
Groceries, utilities, transportation, and healthcare scaled from national averages by Des Moines-West Des Moines’s Regional Price Parity (91.7). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Des Moines-West Des Moines
Computer numerically controlled tool programmers pay in Des Moines-West Des Moines tracks closely to the national median, $68K locally vs. $68K nationwide, a 1% difference. Rent runs $1,318/month for a 2-bedroom (HUD FMR), taking 30.1% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 91.7 (national = 100), meaning everyday costs run about 8% cheaper here. Your dollar stretches further than the headline salary suggests. Pay and costs are both near average, leaving limited margin for savings at the median wage.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Des Moines-West Des Moines, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Davenport-Moline-Rock Island | $46K | $52K |
| Waterloo-Cedar Falls | $60K | $69K |
| Dubuque | $56K | $64K |
| Cedar Rapids | $59K | $66K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Des Moines-West Des Moines, IA
Entry-level computer numerically controlled tool programmers (10th percentile) start around $52K. Mid-career wages sit at $68K. Top earners bring in $95K or more, a $43K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Des Moines-West Des Moines numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Des Moines-West Des Moines?
It’s a stretch — at the median salary of $68K, rent takes 30.1% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,318/month. The 30% guideline puts the comfortable ceiling at roughly $1,300/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Des Moines-West Des Moines?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $52K/year. Take-home on that works out to about $3,138/month. At HUD’s $1,318/month FMR, rent would take 42% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Des Moines-West Des Moines?
Pay here is roughly in line with the national average — $68K locally vs. $68K nationally, a 1% difference.
How does Des Moines-West Des Moines compare to the national average for computer numerically controlled tool programmers?
Des Moines-West Des Moines pays $68K median vs. the U.S. average of $68K — that’s -1%. After adjusting for local cost of living (RPP 91.7), the purchasing-power equivalent is $74K — still ahead of the national median.
How much do computer numerically controlled tool programmers make in Des Moines-West Des Moines, IA?
The median is $67,650 a year, that works out to about $33 an hour. But the range is wide: entry-level workers start around $52,300, and experienced computer numerically controlled tool programmers can clear $94,990. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $68K enough to live in Des Moines-West Des Moines?
On that salary, you'd take home roughly $4,379/month after taxes. A 2-bedroom here rents for about $1,318/month, which eats 30.1% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Des Moines-West Des Moines?
Des Moines-West Des Moines has a Regional Price Parity of 91.7 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $73,773 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.