Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Fort Smith, AR-OK make a median of $54,500 a year, or about $26.2 an hour. The range runs from $47K at the entry level to $76K for experienced workers. Cost of living is below average (RPP 85.89), which stretches that salary to about $63,453 in buying power. Rent on a 2-bedroom averages $937/month, or 26.2% of estimated take-home pay.
So what does $55K get you in Fort Smith?
Groceries, utilities, transportation, and healthcare scaled from national averages by Fort Smith’s Regional Price Parity (85.89). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Fort Smith
Pay for computer numerically controlled tool programmers in Fort Smith runs about 20% below the U.S. median of $68K. Rent runs $937/month for a 2-bedroom (HUD FMR), taking 25.6% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 85.89 (national = 100), meaning everyday costs run about 14% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Fort Smith, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Little Rock-North Little Rock-Conway | $54K | $60K |
| Houston-Pasadena-The Woodlands | $70K | $71K |
| Dallas-Fort Worth-Arlington | $71K | $69K |
| St. Louis | $94K | $99K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Fort Smith, AR-OK
Entry-level computer numerically controlled tool programmers (10th percentile) start around $47K. Mid-career wages sit at $55K. Top earners bring in $76K or more, a $29K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Fort Smith numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Fort Smith?
Yes — at the median salary of $55K, rent takes 25.6% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $937/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for computer numerically controlled tool programmers in Fort Smith?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $47K/year. Take-home on that works out to about $2,804/month. At HUD’s $937/month FMR, rent would take 33% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Fort Smith?
Local pay runs 20% below the national median — $55K here vs. $68K nationally. Cost of living is 14% below the national average, which narrows that gap in real purchasing power.
How does Fort Smith compare to the national average for computer numerically controlled tool programmers?
Fort Smith pays $55K median vs. the U.S. average of $68K — that’s -20%. After adjusting for local cost of living (RPP 85.89), the purchasing-power equivalent is $63K — below the national median.
How much do computer numerically controlled tool programmers make in Fort Smith, AR-OK?
The median is $54,500 a year, that works out to about $26 an hour. But the range is wide: entry-level workers start around $46,730, and experienced computer numerically controlled tool programmers can clear $75,930. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $55K enough to live in Fort Smith?
On that salary, you'd take home roughly $3,656/month after taxes. A 2-bedroom here rents for about $937/month, which eats 25.6% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a computer numerically controlled tool programmers salary go in Fort Smith?
Fort Smith has a Regional Price Parity of 85.89 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $63,453 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.