Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Indianapolis-Carmel-Greenwood, IN make a median of $56,950 a year, or about $27.38 an hour. The range runs from $48K at the entry level to $83K for experienced workers. Adjusted for local prices (RPP 95.7), that's roughly $59,509 in purchasing power. A 2-bedroom apartment runs $1,473/month, about 38.6% of take-home, which is tight.
So what does $57K get you in Indianapolis-Carmel-Greenwood?
Groceries, utilities, transportation, and healthcare scaled from national averages by Indianapolis-Carmel-Greenwood’s Regional Price Parity (95.7). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Indianapolis-Carmel-Greenwood
Pay for computer numerically controlled tool programmers in Indianapolis-Carmel-Greenwood runs about 16% below the U.S. median of $68K. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,473/month, which is 38.4% of the median worker's take-home, past the 30% guideline most planners use. Cost of living (RPP 95.7) is near the national average, so spending patterns here track the typical American budget fairly closely. That combination, below-market pay with high housing costs, makes this a financially demanding market for computer numerically controlled tool programmerss.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Indianapolis-Carmel-Greenwood, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Fort Wayne | $65K | $71K |
| Elkhart-Goshen | $62K | $69K |
| South Bend-Mishawaka | $63K | $68K |
| Columbus | $58K | $62K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Indianapolis-Carmel-Greenwood, IN
Entry-level computer numerically controlled tool programmers (10th percentile) start around $48K. Mid-career wages sit at $57K. Top earners bring in $83K or more, a $35K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Indianapolis-Carmel-Greenwood numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Indianapolis-Carmel-Greenwood?
It’s a stretch — at the median salary of $57K, rent takes 38.4% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,473/month. The 30% guideline puts the comfortable ceiling at roughly $1,200/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Indianapolis-Carmel-Greenwood?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $48K/year. Take-home on that works out to about $2,852/month. At HUD’s $1,473/month FMR, rent would take 52% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Indianapolis-Carmel-Greenwood?
Local pay runs 16% below the national median — $57K here vs. $68K nationally.
How does Indianapolis-Carmel-Greenwood compare to the national average for computer numerically controlled tool programmers?
Indianapolis-Carmel-Greenwood pays $57K median vs. the U.S. average of $68K — that’s -16%. After adjusting for local cost of living (RPP 95.7), the purchasing-power equivalent is $60K — below the national median.
How much do computer numerically controlled tool programmers make in Indianapolis-Carmel-Greenwood, IN?
The median is $56,950 a year, that works out to about $27 an hour. But the range is wide: entry-level workers start around $47,530, and experienced computer numerically controlled tool programmers can clear $82,660. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $57K enough to live in Indianapolis-Carmel-Greenwood?
On that salary, you'd take home roughly $3,838/month after taxes. A 2-bedroom here rents for about $1,473/month, which eats 38.4% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Indianapolis-Carmel-Greenwood?
Indianapolis-Carmel-Greenwood has a Regional Price Parity of 95.7 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $59,509 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.