Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Seattle-Tacoma-Bellevue, WA make a median of $86,860 a year, or about $41.76 an hour. The range runs from $66K at the entry level to $111K for experienced workers. Prices run high here (RPP 111.13), so that salary is closer to $78,161 in real purchasing power. A 2-bedroom apartment runs $2,501/month, about 43% of take-home, which is tight.
So what does $87K get you in Seattle-Tacoma-Bellevue?
Groceries, utilities, transportation, and healthcare scaled from national averages by Seattle-Tacoma-Bellevue’s Regional Price Parity (111.13). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Seattle-Tacoma-Bellevue
Seattle-Tacoma-Bellevue sits well above the national pay line for computer numerically controlled tool programmers, local pay runs about 28% higher than the U.S. median of $68K. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $2,501/month, which is 43.2% of the median worker's take-home, past the 30% guideline most planners use. Cost-of-living overall is 11% above the national average (BEA RPP 111.13), so groceries and services cost more too. The pay premium is real, but so are the offsets.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Seattle-Tacoma-Bellevue, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Spokane-Spokane Valley | $76K | $76K |
| Portland-Vancouver-Hillsboro | $76K | $72K |
| Boise City | $64K | $65K |
| Eugene-Springfield | $69K | $68K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Seattle-Tacoma-Bellevue, WA
Entry-level computer numerically controlled tool programmers (10th percentile) start around $66K. Mid-career wages sit at $87K. Top earners bring in $111K or more, a $45K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Seattle-Tacoma-Bellevue numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Seattle-Tacoma-Bellevue?
It’s a stretch — at the median salary of $87K, rent takes 43.2% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $2,501/month. The 30% guideline puts the comfortable ceiling at roughly $1,700/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Seattle-Tacoma-Bellevue?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $66K/year. Take-home on that works out to about $3,959/month. At HUD’s $2,501/month FMR, rent would take 63% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Seattle-Tacoma-Bellevue?
Local pay is 28% above the national median — $87K here vs. $68K nationally. Keep in mind cost of living here is 11% above the national average, which offsets some of that premium.
How does Seattle-Tacoma-Bellevue compare to the national average for computer numerically controlled tool programmers?
Seattle-Tacoma-Bellevue pays $87K median vs. the U.S. average of $68K — that’s +28%. After adjusting for local cost of living (RPP 111.13), the purchasing-power equivalent is $78K — still ahead of the national median.
How much do computer numerically controlled tool programmers make in Seattle-Tacoma-Bellevue, WA?
The median is $86,860 a year, that works out to about $42 an hour. But the range is wide: entry-level workers start around $65,990, and experienced computer numerically controlled tool programmers can clear $111,030. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $87K enough to live in Seattle-Tacoma-Bellevue?
On that salary, you'd take home roughly $5,791/month after taxes. A 2-bedroom here rents for about $2,501/month, which eats 43.2% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Seattle-Tacoma-Bellevue?
Seattle-Tacoma-Bellevue has a Regional Price Parity of 111.13 (100 is the national average). Prices are above average here, so your dollar buys less than the same salary would in a cheaper metro. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $78,161 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.