Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Wichita, KS make a median of $99,790 a year, or about $47.97 an hour. The range runs from $60K at the entry level to $130K for experienced workers. Cost of living is below average (RPP 88.95), which stretches that salary to about $112,187 in buying power. Rent on a 2-bedroom averages $1,099/month, or 17.4% of estimated take-home pay.
So what does $100K get you in Wichita?
Groceries, utilities, transportation, and healthcare scaled from national averages by Wichita’s Regional Price Parity (88.95). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Wichita
Wichita sits well above the national pay line for computer numerically controlled tool programmers, local pay runs about 46% higher than the U.S. median of $68K. Housing is manageable: a 2-bedroom at the HUD median costs $1,099/month, 17.9% of take-home, well inside the 30% guideline. Regional Price Parity sits at 88.95 (national = 100), meaning everyday costs run about 11% cheaper here. Your dollar stretches further than the headline salary suggests. Combined with manageable housing costs, Wichita offers a genuinely strong financial position for computer numerically controlled tool programmerss at the median.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Wichita, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| St. Louis | $94K | $99K |
| Denver-Aurora-Centennial | $70K | , |
| Kansas City | $71K | $77K |
| Tulsa | $70K | $78K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Wichita, KS
Entry-level computer numerically controlled tool programmers (10th percentile) start around $60K. Mid-career wages sit at $100K. Top earners bring in $130K or more, a $71K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Wichita numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Wichita?
Yes — at the median salary of $100K, rent takes 17.9% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,099/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for computer numerically controlled tool programmers in Wichita?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $60K/year. Take-home on that works out to about $3,572/month. At HUD’s $1,099/month FMR, rent would take 31% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Wichita?
Local pay is 46% above the national median — $100K here vs. $68K nationally.
How does Wichita compare to the national average for computer numerically controlled tool programmers?
Wichita pays $100K median vs. the U.S. average of $68K — that’s +46%. After adjusting for local cost of living (RPP 88.95), the purchasing-power equivalent is $112K — still ahead of the national median.
How much do computer numerically controlled tool programmers make in Wichita, KS?
The median is $99,790 a year, that works out to about $48 an hour. But the range is wide: entry-level workers start around $59,540, and experienced computer numerically controlled tool programmers can clear $130,110. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $100K enough to live in Wichita?
On that salary, you'd take home roughly $6,130/month after taxes. A 2-bedroom here rents for about $1,099/month, which eats 17.9% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a computer numerically controlled tool programmers salary go in Wichita?
Wichita has a Regional Price Parity of 88.95 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $112,187 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.