Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Salary
Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastics in Alabama make a median of $43,830 a year, or about $21.07 an hour. The range runs from $35K at the entry level to $55K for experienced workers. Cost of living is below average (RPP 88.36), which stretches that salary to about $49,604 in buying power. A 2-bedroom apartment runs $1,085/month, about 36.3% of take-home, which is tight.
Statewide average. Salary and cost of living vary significantly across Alabama. Jump to a metro for precise data:
So what does $44K get you in Alabama?
About cutting, punching, and press machine setters, operators, and tenders, metal and plastics
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Alabama
Cutting, punching, and press machine setters, operators, and tenders, metal and plastic pay in Alabama tracks closely to the national median, $44K locally vs. $46K nationwide, a 5% difference. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,085/month, which is 37% of the median worker's take-home, past the 30% guideline most planners use. Regional Price Parity sits at 88.36 (national = 100), meaning everyday costs run about 12% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compensation breakdown
Annual earnings by percentile, Alabama
Entry-level cutting, punching, and press machine setters, operators, and tenders, metal and plastics (10th percentile) start around $35K. Mid-career wages sit at $44K. Top earners bring in $55K or more, a $20K spread from bottom to top.
Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic salary by metro in Alabama
12 metro areas with BLS data, ranked by median pay
| Metro area | Median salary | vs. state | Employment |
|---|---|---|---|
| Huntsville | $48K | +10% | 680 |
| Decatur | $45K | +3% | 320 |
| Birmingham | $45K | +3% | 1,490 |
| Daphne-Fairhope-Foley | $44K | +1% | 60 |
| Mobile | $44K | +0% | 220 |
| Montgomery | $43K | -2% | 310 |
| Tuscaloosa | $41K | -7% | 160 |
| Anniston-Oxford | $40K | -9% | 90 |
| Gadsden | $38K | -12% | 240 |
| Florence-Muscle Shoals | $38K | -13% | 130 |
| Dothan | $38K | -14% | 150 |
| Auburn-Opelika | $37K | -15% | 160 |
Showing 1–10 of 12 metros
Compare to other states
Track cutting, punching, and press machine setters, operators, and tenders, metal and plastic salary changes
BLS updates this data quarterly. We'll email you when Alabama numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a cutting, punching, and press machine setters, operators, and tenders, metal and plastic afford a 2BR apartment alone in Alabama?
It’s a stretch — at the median salary of $44K, rent takes 37% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,085/month. The 30% guideline puts the comfortable ceiling at roughly $900/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for cutting, punching, and press machine setters, operators, and tenders, metal and plastics in Alabama?
The 10th-percentile wage — what new cutting, punching, and press machine setters, operators, and tenders, metal and plastics typically earn — is $35K/year. Take-home on that works out to about $2,080/month. At HUD’s $1,085/month FMR, rent would take 52% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is cutting, punching, and press machine setters, operators, and tenders, metal and plastic a high-paying job in Alabama?
Pay here is roughly in line with the national average — $44K locally vs. $46K nationally, a 5% difference.
How does Alabama compare to the national average for cutting, punching, and press machine setters, operators, and tenders, metal and plastics?
Alabama pays $44K median vs. the U.S. average of $46K — that’s -5%. After adjusting for local cost of living (RPP 88.36), the purchasing-power equivalent is $50K — still ahead of the national median.
How much do cutting, punching, and press machine setters, operators, and tenders, metal and plastics make in Alabama?
The median is $43,830 a year, that works out to about $21 an hour. But the range is wide: entry-level workers start around $34,660, and experienced cutting, punching, and press machine setters, operators, and tenders, metal and plastics can clear $54,760. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $44K enough to live in Alabama?
On that salary, you'd take home roughly $2,936/month after taxes. A 2-bedroom here rents for about $1,085/month, which eats 37% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a cutting, punching, and press machine setters, operators, and tenders, metal and plastic salary go in Alabama?
Alabama has a Regional Price Parity of 88.36 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median cutting, punching, and press machine setters, operators, and tenders, metal and plastic salary is worth about $49,604 in national-average purchasing power.
Where do cutting, punching, and press machine setters, operators, and tenders, metal and plastics get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.