Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic Salary
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastics in Erie, PA make a median of $43,140 a year, or about $20.74 an hour. The range runs from $36K at the entry level to $60K for experienced workers.
So what does $43K get you in Erie?
Groceries, utilities, transportation, and healthcare scaled from national averages by Erie’s Regional Price Parity (91). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About lathe and turning machine tool setters, operators, and tenders, metal and plastics
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Erie
Pay for lathe and turning machine tool setters, operators, and tenders, metal and plastic in Erie runs about 15% below the U.S. median of $51K. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,212/month, which is 41.1% of the median worker's take-home, past the 30% guideline most planners use. Regional Price Parity sits at 91 (national = 100), meaning everyday costs run about 9% cheaper here. Your dollar stretches further than the headline salary suggests. That combination, below-market pay with high housing costs, makes this a financially demanding market for lathe and turning machine tool setters, operators, and tenders, metal and plastics.
Compared to nearby metros
Median pay for lathe and turning machine tool setters, operators, and tenders, metal and plastics in metros near Erie, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Pittsburgh | $67K | , |
| Philadelphia-Camden-Wilmington | $50K | , |
| Cleveland | $51K | , |
| New York-Newark-Jersey City | $51K | , |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Erie, PA
Entry-level lathe and turning machine tool setters, operators, and tenders, metal and plastics (10th percentile) start around $36K. Mid-career wages sit at $43K. Top earners bring in $60K or more, a $24K spread from bottom to top.
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic pay across states
Median income ranked highest to lowest, compared to the national figure
View Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Colorado | $72K | +42% | 150 |
| Maine | $65K | +28% | 80 |
| Minnesota | $61K | +21% | 150 |
| Massachusetts | $61K | +20% | 690 |
| California | $60K | +19% | 2,600 |
| Alabama | $58K | +16% | 100 |
| Nevada | $58K | +15% | 60 |
| Pennsylvania | $57K | +13% | 580 |
| Arizona | $56K | +10% | 110 |
| Illinois | $55K | +9% | 1,260 |
| Maryland | $55K | +8% | 60 |
| North Carolina | $54K | +6% | 310 |
| West Virginia | $54K | +6% | 50 |
| Wisconsin | $51K | +1% | 340 |
| New York | $51K | +0% | 530 |
| Louisiana | $51K | -0% | 90 |
| Iowa | $50K | -0% | 180 |
| Georgia | $50K | -1% | 100 |
| Ohio | $50K | -1% | 1,180 |
| South Carolina | $49K | -2% | 370 |
| Indiana | $49K | -2% | 710 |
| Connecticut | $49K | -2% | 690 |
| New Hampshire | $49K | -3% | 150 |
| Missouri | $49K | -3% | 160 |
| Virginia | $49K | -3% | 210 |
| New Jersey | $48K | -5% | 190 |
| Texas | $48K | -5% | 2,150 |
| Nebraska | $47K | -6% | 120 |
| Kansas | $47K | -7% | 90 |
| Kentucky | $47K | -7% | 250 |
| Michigan | $47K | -8% | 1,540 |
| Florida | $45K | -12% | 140 |
| Oklahoma | $44K | -14% | 240 |
| Oregon | $42K | -18% | 40 |
| Tennessee | $41K | -20% | 700 |
| Arkansas | $39K | -23% | 190 |
Showing 1–10 of 36 states
BLS does not publish data for every state when sample sizes are too small
Track lathe and turning machine tool setters, operators, and tenders, metal and plastic salary changes
BLS updates this data quarterly. We'll email you when Erie numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a lathe and turning machine tool setters, operators, and tenders, metal and plastic afford a 2BR apartment alone in Erie?
It’s a stretch — at the median salary of $43K, rent takes 41.1% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,212/month. The 30% guideline puts the comfortable ceiling at roughly $900/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for lathe and turning machine tool setters, operators, and tenders, metal and plastics in Erie?
The 10th-percentile wage — what new lathe and turning machine tool setters, operators, and tenders, metal and plastics typically earn — is $36K/year. Take-home on that works out to about $2,178/month. At HUD’s $1,212/month FMR, rent would take 56% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is lathe and turning machine tool setters, operators, and tenders, metal and plastic a high-paying job in Erie?
Local pay runs 15% below the national median — $43K here vs. $51K nationally. Cost of living is 9% below the national average, which narrows that gap in real purchasing power.
How does Erie compare to the national average for lathe and turning machine tool setters, operators, and tenders, metal and plastics?
Erie pays $43K median vs. the U.S. average of $51K — that’s -15%. After adjusting for local cost of living (RPP 91), the purchasing-power equivalent is $47K — below the national median.
How much do lathe and turning machine tool setters, operators, and tenders, metal and plastics make in Erie, PA?
The median is $43,140 a year, that works out to about $21 an hour. But the range is wide: entry-level workers start around $36,300, and experienced lathe and turning machine tool setters, operators, and tenders, metal and plastics can clear $60,150. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $43K enough to live in Erie?
On that salary, you'd take home roughly $2,948/month after taxes. A 2-bedroom here rents for about $1,212/month, which eats 41.1% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a lathe and turning machine tool setters, operators, and tenders, metal and plastic salary go in Erie?
Erie has a Regional Price Parity of 100 (100 is the national average). That's right at the national average. After cost-of-living adjustment, the median lathe and turning machine tool setters, operators, and tenders, metal and plastic salary is worth about $47,407 in national-average purchasing power.
Where do lathe and turning machine tool setters, operators, and tenders, metal and plastics get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.