Paving, Surfacing, and Tamping Equipment Operators Salary
The median pay for a paving, surfacing, and tamping equipment operators in Deltona-Daytona Beach-Ormond Beach, FL is $49,850/year ($23.97/hour), per BLS data. The range runs from $38K at the entry level to $59K for experienced workers.
So what does $50K get you in Deltona-Daytona Beach-Ormond Beach?
Groceries, utilities, transportation, and healthcare scaled from national averages by Deltona-Daytona Beach-Ormond Beach’s Regional Price Parity (99.4). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About paving, surfacing, and tamping equipment operators
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Deltona-Daytona Beach-Ormond Beach
Paving, surfacing, and tamping equipment operators pay in Deltona-Daytona Beach-Ormond Beach tracks closely to the national median, $50K locally vs. $53K nationwide, a 7% difference. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,700/month, which is 48.5% of the median worker's take-home, past the 30% guideline most planners use. Cost of living (RPP 99.4) is near the national average, so spending patterns here track the typical American budget fairly closely. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for paving, surfacing, and tamping equipment operators in metros near Deltona-Daytona Beach-Ormond Beach, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| North Port-Bradenton-Sarasota | $48K | , |
| Palm Bay-Melbourne-Titusville | $47K | , |
| Miami-Fort Lauderdale-West Palm Beach | $47K | , |
| Tampa-St. Petersburg-Clearwater | $47K | , |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Deltona-Daytona Beach-Ormond Beach, FL
Entry-level paving, surfacing, and tamping equipment operators (10th percentile) start around $38K. Mid-career wages sit at $50K. Top earners bring in $59K or more, a $21K spread from bottom to top.
Paving, Surfacing, and Tamping Equipment Operators pay across states
Median income ranked highest to lowest, compared to the national figure
View Paving, Surfacing, and Tamping Equipment Operators salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Hawaii | $111K | +109% | N/A |
| District of Columbia | $91K | +71% | 70 |
| Washington | $91K | +70% | 530 |
| Alaska | $84K | +57% | 80 |
| California | $83K | +56% | 1,400 |
| Connecticut | $77K | +45% | N/A |
| Idaho | $73K | +37% | 130 |
| Illinois | $73K | +37% | 950 |
| Missouri | $69K | +30% | 1,560 |
| Wisconsin | $69K | +29% | 960 |
| Minnesota | $68K | +28% | 830 |
| Oregon | $63K | +19% | 520 |
| Rhode Island | $63K | +18% | 160 |
| New York | $63K | +18% | 4,530 |
| New Hampshire | $62K | +16% | 260 |
| Iowa | $61K | +15% | N/A |
| Massachusetts | $61K | +14% | 560 |
| Maryland | $61K | +13% | 750 |
| Ohio | $60K | +13% | 2,370 |
| South Dakota | $60K | +13% | 130 |
| Colorado | $59K | +10% | 920 |
| Wyoming | $58K | +9% | 160 |
| Maine | $57K | +7% | 250 |
| Pennsylvania | $56K | +5% | 520 |
| Montana | $56K | +5% | 260 |
| Vermont | $55K | +3% | 70 |
| Michigan | $54K | +2% | 1,720 |
| Delaware | $54K | +1% | 150 |
| Arizona | $52K | -2% | 170 |
| Nevada | $51K | -4% | N/A |
| West Virginia | $51K | -4% | 210 |
| New Jersey | $51K | -5% | 840 |
| Indiana | $50K | -6% | 910 |
| Kansas | $49K | -8% | 540 |
| Utah | $49K | -8% | 410 |
| Louisiana | $48K | -9% | 350 |
| Virginia | $48K | -10% | 1,660 |
| North Carolina | $48K | -10% | 1,940 |
| Texas | $47K | -12% | 3,940 |
| South Carolina | $47K | -12% | 630 |
| Florida | $47K | -12% | 2,740 |
| Oklahoma | $47K | -12% | 550 |
| Georgia | $46K | -14% | 1,270 |
| New Mexico | $46K | -14% | 990 |
| Nebraska | $46K | -14% | 390 |
| Kentucky | $46K | -14% | 110 |
| Arkansas | $44K | -17% | 490 |
| Tennessee | $43K | -20% | 1,730 |
| Alabama | $42K | -21% | 700 |
| Mississippi | $37K | -31% | 470 |
Showing 1–10 of 50 states
BLS does not publish data for every state when sample sizes are too small
Track paving, surfacing, and tamping equipment operators salary changes
BLS updates this data quarterly. We'll email you when Deltona-Daytona Beach-Ormond Beach numbers change.
Related careers in Construction & Trades
Frequently asked questions
Can a paving, surfacing, and tamping equipment operator afford a 2BR apartment alone in Deltona-Daytona Beach-Ormond Beach?
It’s a stretch — at the median salary of $50K, rent takes 48.5% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,700/month. The 30% guideline puts the comfortable ceiling at roughly $1,100/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for paving, surfacing, and tamping equipment operators in Deltona-Daytona Beach-Ormond Beach?
The 10th-percentile wage — what new paving, surfacing, and tamping equipment operators typically earn — is $38K/year. Take-home on that works out to about $2,278/month. At HUD’s $1,700/month FMR, rent would take 75% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is paving, surfacing, and tamping equipment operator a high-paying job in Deltona-Daytona Beach-Ormond Beach?
Pay here is roughly in line with the national average — $50K locally vs. $53K nationally, a 7% difference.
How does Deltona-Daytona Beach-Ormond Beach compare to the national average for paving, surfacing, and tamping equipment operators?
Deltona-Daytona Beach-Ormond Beach pays $50K median vs. the U.S. average of $53K — that’s -7%. After adjusting for local cost of living (RPP 99.4), the purchasing-power equivalent is $50K — below the national median.
How much do paving, surfacing, and tamping equipment operators make in Deltona-Daytona Beach-Ormond Beach, FL?
The median is $49,850 a year, that works out to about $24 an hour. But the range is wide: entry-level workers start around $37,970, and experienced paving, surfacing, and tamping equipment operators can clear $59,020. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $50K enough to live in Deltona-Daytona Beach-Ormond Beach?
On that salary, you'd take home roughly $3,508/month after taxes. A 2-bedroom here rents for about $1,700/month, which eats 48.5% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a paving, surfacing, and tamping equipment operators salary go in Deltona-Daytona Beach-Ormond Beach?
Deltona-Daytona Beach-Ormond Beach has a Regional Price Parity of 100 (100 is the national average). That's right at the national average. After cost-of-living adjustment, the median paving, surfacing, and tamping equipment operators salary is worth about $50,151 in national-average purchasing power.
Where do paving, surfacing, and tamping equipment operators get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.