Sheet Metal Workers Salary
The median pay for a sheet metal workers in Dayton-Kettering-Beavercreek, OH is $72,330/year ($34.77/hour), per BLS data. The range runs from $45K at the entry level to $86K for experienced workers. Cost of living is below average (RPP 92.69), which stretches that salary to about $78,034 in buying power. Rent on a 2-bedroom averages $1,273/month, or 26.8% of estimated take-home pay.
So what does $72K get you in Dayton-Kettering-Beavercreek?
Groceries, utilities, transportation, and healthcare scaled from national averages by Dayton-Kettering-Beavercreek’s Regional Price Parity (92.69). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About sheet metal workers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Dayton-Kettering-Beavercreek
Dayton-Kettering-Beavercreek sits well above the national pay line for sheet metal workers, local pay runs about 17% higher than the U.S. median of $62K. Rent runs $1,273/month for a 2-bedroom (HUD FMR), taking 26.4% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 92.69 (national = 100), meaning everyday costs run about 7% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for sheet metal workers in metros near Dayton-Kettering-Beavercreek, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Cincinnati | $74K | $77K |
| Columbus | $78K | $81K |
| Cleveland | $77K | $82K |
| Akron | $76K | $82K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Dayton-Kettering-Beavercreek, OH
Entry-level sheet metal workers (10th percentile) start around $45K. Mid-career wages sit at $72K. Top earners bring in $86K or more, a $41K spread from bottom to top.
Sheet Metal Workers pay across states
Median income ranked highest to lowest, compared to the national figure
View Sheet Metal Workers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $99K | +59% | 3,440 |
| Hawaii | $96K | +56% | 490 |
| Alaska | $95K | +53% | 240 |
| New Jersey | $93K | +50% | 2,790 |
| Illinois | $87K | +40% | 3,260 |
| Massachusetts | $82K | +33% | 2,890 |
| Connecticut | $79K | +27% | 1,480 |
| Wisconsin | $78K | +26% | 3,180 |
| California | $77K | +24% | 8,390 |
| Ohio | $75K | +21% | 4,180 |
| New York | $74K | +19% | 6,570 |
| Oregon | $74K | +19% | 3,250 |
| Minnesota | $73K | +18% | 2,980 |
| West Virginia | $72K | +17% | 540 |
| Iowa | $66K | +8% | 1,650 |
| Oklahoma | $66K | +6% | 2,820 |
| North Dakota | $65K | +5% | 290 |
| Rhode Island | $65K | +5% | 370 |
| Michigan | $64K | +4% | 4,000 |
| Nebraska | $64K | +4% | 440 |
| Indiana | $64K | +4% | 4,580 |
| Missouri | $64K | +3% | 2,640 |
| Utah | $63K | +2% | 1,810 |
| Kansas | $63K | +1% | 1,730 |
| Maryland | $63K | +1% | 1,940 |
| Maine | $62K | +1% | 830 |
| Delaware | $61K | -1% | 440 |
| Montana | $61K | -1% | 410 |
| Pennsylvania | $61K | -1% | 3,260 |
| Kentucky | $61K | -2% | 2,210 |
| New Hampshire | $60K | -3% | 760 |
| Tennessee | $59K | -4% | 1,850 |
| Wyoming | $59K | -5% | 160 |
| Vermont | $58K | -6% | 370 |
| Colorado | $58K | -6% | 1,660 |
| Georgia | $57K | -8% | 3,590 |
| New Mexico | $57K | -8% | 640 |
| Texas | $54K | -12% | 9,540 |
| Virginia | $52K | -16% | 4,520 |
| North Carolina | $51K | -18% | 2,780 |
| Louisiana | $50K | -19% | 1,080 |
| Arizona | $50K | -19% | 3,060 |
| South Carolina | $50K | -19% | 1,710 |
| Florida | $50K | -20% | 8,040 |
| Mississippi | $50K | -20% | 1,260 |
| South Dakota | $48K | -23% | 320 |
| Alabama | $48K | -23% | 1,450 |
| Nevada | $47K | -24% | 1,270 |
| Idaho | $46K | -25% | 1,290 |
| Arkansas | $46K | -26% | 1,230 |
Showing 1–10 of 50 states with published data
BLS does not publish data for every state when sample sizes are too small
Track sheet metal workers salary changes
BLS updates this data quarterly. We'll email you when Dayton-Kettering-Beavercreek numbers change.
Related careers in Construction & Trades
Frequently asked questions
Can a sheet metal worker afford a 2BR apartment alone in Dayton-Kettering-Beavercreek?
Yes — at the median salary of $72K, rent takes 26.4% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,273/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for sheet metal workers in Dayton-Kettering-Beavercreek?
The 10th-percentile wage — what new sheet metal workers typically earn — is $45K/year. Take-home on that works out to about $2,698/month. At HUD’s $1,273/month FMR, rent would take 47% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is sheet metal worker a high-paying job in Dayton-Kettering-Beavercreek?
Local pay is 17% above the national median — $72K here vs. $62K nationally.
How does Dayton-Kettering-Beavercreek compare to the national average for sheet metal workers?
Dayton-Kettering-Beavercreek pays $72K median vs. the U.S. average of $62K — that’s +17%. After adjusting for local cost of living (RPP 92.69), the purchasing-power equivalent is $78K — still ahead of the national median.
How much do sheet metal workers make in Dayton-Kettering-Beavercreek, OH?
The median is $72,330 a year, that works out to about $35 an hour. But the range is wide: entry-level workers start around $44,970, and experienced sheet metal workers can clear $85,700. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $72K enough to live in Dayton-Kettering-Beavercreek?
On that salary, you'd take home roughly $4,831/month after taxes. A 2-bedroom here rents for about $1,273/month, which eats 26.4% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a sheet metal workers salary go in Dayton-Kettering-Beavercreek?
Dayton-Kettering-Beavercreek has a Regional Price Parity of 92.69 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median sheet metal workers salary is worth about $78,034 in national-average purchasing power.
Where do sheet metal workers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.