Computer Numerically Controlled Tool Operators Salary
Computer Numerically Controlled Tool Operators in Fargo, ND-MN make a median of $63,610 a year, or about $30.58 an hour. The range runs from $42K at the entry level to $64K for experienced workers. Cost of living is below average (RPP 90.87), which stretches that salary to about $70,001 in buying power. Rent on a 2-bedroom averages $1,112/month, or 26.1% of estimated take-home pay.
So what does $64K get you in Fargo?
Groceries, utilities, transportation, and healthcare scaled from national averages by Fargo’s Regional Price Parity (90.87). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool operators
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Fargo
Fargo sits well above the national pay line for computer numerically controlled tool operators, local pay runs about 25% higher than the U.S. median of $51K. Rent runs $1,112/month for a 2-bedroom (HUD FMR), taking 25.7% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 90.87 (national = 100), meaning everyday costs run about 9% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for computer numerically controlled tool operators in metros near Fargo, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Grand Forks | $51K | $59K |
| Minneapolis-St. Paul-Bloomington | $58K | $55K |
| Sioux Falls | $52K | $58K |
| St. Cloud | $58K | $66K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Fargo, ND-MN
Entry-level computer numerically controlled tool operators (10th percentile) start around $42K. Mid-career wages sit at $64K. Top earners bring in $64K or more, a $21K spread from bottom to top.
Computer Numerically Controlled Tool Operators pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Operators salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $108K | +113% | 2,270 |
| Massachusetts | $62K | +22% | 2,500 |
| North Dakota | $60K | +19% | 250 |
| Connecticut | $60K | +18% | 2,740 |
| New Hampshire | $60K | +18% | 1,770 |
| Maine | $60K | +18% | 440 |
| Vermont | $58K | +13% | 1,190 |
| Rhode Island | $57K | +13% | 540 |
| Minnesota | $57K | +12% | 4,290 |
| Oregon | $57K | +12% | 2,920 |
| California | $57K | +11% | 21,680 |
| Colorado | $55K | +9% | 1,580 |
| Pennsylvania | $55K | +8% | 7,840 |
| Wyoming | $54K | +7% | 60 |
| New Jersey | $54K | +7% | 1,770 |
| Idaho | $53K | +5% | 480 |
| New York | $53K | +5% | 5,530 |
| Wisconsin | $53K | +4% | 8,330 |
| Alabama | $52K | +3% | 3,120 |
| Iowa | $52K | +3% | 4,750 |
| Montana | $52K | +2% | 240 |
| South Carolina | $52K | +2% | 2,460 |
| Missouri | $51K | +1% | 1,500 |
| South Dakota | $51K | +0% | 1,420 |
| North Carolina | $50K | -0% | 3,680 |
| Arkansas | $50K | -1% | 2,180 |
| Delaware | $50K | -1% | 170 |
| Tennessee | $50K | -1% | 1,980 |
| Louisiana | $50K | -2% | 670 |
| West Virginia | $50K | -2% | 160 |
| Virginia | $50K | -2% | 1,890 |
| Nebraska | $49K | -3% | 830 |
| Kentucky | $49K | -3% | 1,740 |
| Ohio | $49K | -3% | 21,250 |
| Arizona | $49K | -3% | 1,800 |
| Indiana | $49K | -4% | 9,690 |
| Texas | $48K | -4% | 13,190 |
| Illinois | $48K | -4% | 8,170 |
| Kansas | $48K | -5% | 2,540 |
| Oklahoma | $48K | -6% | 1,490 |
| Georgia | $48K | -6% | 2,200 |
| Michigan | $47K | -7% | 7,330 |
| Maryland | $47K | -8% | 1,800 |
| Nevada | $47K | -8% | 400 |
| Florida | $46K | -9% | 4,040 |
| Utah | $45K | -11% | 1,170 |
| New Mexico | $45K | -11% | 70 |
| Mississippi | $40K | -22% | 1,290 |
Showing 1–10 of 48 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool operators salary changes
BLS updates this data quarterly. We'll email you when Fargo numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool operator afford a 2BR apartment alone in Fargo?
Yes — at the median salary of $64K, rent takes 25.7% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,112/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for computer numerically controlled tool operators in Fargo?
The 10th-percentile wage — what new computer numerically controlled tool operators typically earn — is $42K/year. Take-home on that works out to about $2,530/month. At HUD’s $1,112/month FMR, rent would take 44% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool operator a high-paying job in Fargo?
Local pay is 25% above the national median — $64K here vs. $51K nationally.
How does Fargo compare to the national average for computer numerically controlled tool operators?
Fargo pays $64K median vs. the U.S. average of $51K — that’s +25%. After adjusting for local cost of living (RPP 90.87), the purchasing-power equivalent is $70K — still ahead of the national median.
How much do computer numerically controlled tool operators make in Fargo, ND-MN?
The median is $63,610 a year, that works out to about $31 an hour. But the range is wide: entry-level workers start around $42,160, and experienced computer numerically controlled tool operators can clear $63,610. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $64K enough to live in Fargo?
On that salary, you'd take home roughly $4,325/month after taxes. A 2-bedroom here rents for about $1,112/month, which eats 25.7% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a computer numerically controlled tool operators salary go in Fargo?
Fargo has a Regional Price Parity of 90.87 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool operators salary is worth about $70,001 in national-average purchasing power.
Where do computer numerically controlled tool operators get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.