Computer Numerically Controlled Tool Operators Salary
Computer Numerically Controlled Tool Operators in Macon-Bibb County, GA make a median of $41,740 a year, or about $20.07 an hour. The range runs from $38K at the entry level to $65K for experienced workers. Cost of living is below average (RPP 88.53), which stretches that salary to about $47,148 in buying power. A 2-bedroom apartment runs $1,307/month, about 45.9% of take-home, which is tight.
So what does $42K get you in Macon-Bibb County?
Groceries, utilities, transportation, and healthcare scaled from national averages by Macon-Bibb County’s Regional Price Parity (88.53). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool operators
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Macon-Bibb County
Pay for computer numerically controlled tool operators in Macon-Bibb County runs about 18% below the U.S. median of $51K. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,307/month, which is 46.5% of the median worker's take-home, past the 30% guideline most planners use. Regional Price Parity sits at 88.53 (national = 100), meaning everyday costs run about 11% cheaper here. Your dollar stretches further than the headline salary suggests. That combination, below-market pay with high housing costs, makes this a financially demanding market for computer numerically controlled tool operatorss.
Compared to nearby metros
Median pay for computer numerically controlled tool operators in metros near Macon-Bibb County, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Rome | $39K | $43K |
| Atlanta-Sandy Springs-Roswell | $48K | $48K |
| Savannah | $59K | $62K |
| Gainesville | $47K | $48K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Macon-Bibb County, GA
Entry-level computer numerically controlled tool operators (10th percentile) start around $38K. Mid-career wages sit at $42K. Top earners bring in $65K or more, a $26K spread from bottom to top.
Computer Numerically Controlled Tool Operators pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Operators salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $108K | +113% | 2,270 |
| Massachusetts | $62K | +22% | 2,500 |
| North Dakota | $60K | +19% | 250 |
| Connecticut | $60K | +18% | 2,740 |
| New Hampshire | $60K | +18% | 1,770 |
| Maine | $60K | +18% | 440 |
| Vermont | $58K | +13% | 1,190 |
| Rhode Island | $57K | +13% | 540 |
| Minnesota | $57K | +12% | 4,290 |
| Oregon | $57K | +12% | 2,920 |
| California | $57K | +11% | 21,680 |
| Colorado | $55K | +9% | 1,580 |
| Pennsylvania | $55K | +8% | 7,840 |
| Wyoming | $54K | +7% | 60 |
| New Jersey | $54K | +7% | 1,770 |
| Idaho | $53K | +5% | 480 |
| New York | $53K | +5% | 5,530 |
| Wisconsin | $53K | +4% | 8,330 |
| Alabama | $52K | +3% | 3,120 |
| Iowa | $52K | +3% | 4,750 |
| Montana | $52K | +2% | 240 |
| South Carolina | $52K | +2% | 2,460 |
| Missouri | $51K | +1% | 1,500 |
| South Dakota | $51K | +0% | 1,420 |
| North Carolina | $50K | -0% | 3,680 |
| Arkansas | $50K | -1% | 2,180 |
| Delaware | $50K | -1% | 170 |
| Tennessee | $50K | -1% | 1,980 |
| Louisiana | $50K | -2% | 670 |
| West Virginia | $50K | -2% | 160 |
| Virginia | $50K | -2% | 1,890 |
| Nebraska | $49K | -3% | 830 |
| Kentucky | $49K | -3% | 1,740 |
| Ohio | $49K | -3% | 21,250 |
| Arizona | $49K | -3% | 1,800 |
| Indiana | $49K | -4% | 9,690 |
| Texas | $48K | -4% | 13,190 |
| Illinois | $48K | -4% | 8,170 |
| Kansas | $48K | -5% | 2,540 |
| Oklahoma | $48K | -6% | 1,490 |
| Georgia | $48K | -6% | 2,200 |
| Michigan | $47K | -7% | 7,330 |
| Maryland | $47K | -8% | 1,800 |
| Nevada | $47K | -8% | 400 |
| Florida | $46K | -9% | 4,040 |
| Utah | $45K | -11% | 1,170 |
| New Mexico | $45K | -11% | 70 |
| Mississippi | $40K | -22% | 1,290 |
Showing 1–10 of 48 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool operators salary changes
BLS updates this data quarterly. We'll email you when Macon-Bibb County numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool operator afford a 2BR apartment alone in Macon-Bibb County?
It’s a stretch — at the median salary of $42K, rent takes 46.5% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,307/month. The 30% guideline puts the comfortable ceiling at roughly $800/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool operators in Macon-Bibb County?
The 10th-percentile wage — what new computer numerically controlled tool operators typically earn — is $38K/year. Take-home on that works out to about $2,291/month. At HUD’s $1,307/month FMR, rent would take 57% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool operator a high-paying job in Macon-Bibb County?
Local pay runs 18% below the national median — $42K here vs. $51K nationally. Cost of living is 11% below the national average, which narrows that gap in real purchasing power.
How does Macon-Bibb County compare to the national average for computer numerically controlled tool operators?
Macon-Bibb County pays $42K median vs. the U.S. average of $51K — that’s -18%. After adjusting for local cost of living (RPP 88.53), the purchasing-power equivalent is $47K — below the national median.
How much do computer numerically controlled tool operators make in Macon-Bibb County, GA?
The median is $41,740 a year, that works out to about $20 an hour. But the range is wide: entry-level workers start around $38,180, and experienced computer numerically controlled tool operators can clear $64,640. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $42K enough to live in Macon-Bibb County?
On that salary, you'd take home roughly $2,811/month after taxes. A 2-bedroom here rents for about $1,307/month, which eats 46.5% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool operators salary go in Macon-Bibb County?
Macon-Bibb County has a Regional Price Parity of 88.53 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool operators salary is worth about $47,148 in national-average purchasing power.
Where do computer numerically controlled tool operators get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.