Computer Numerically Controlled Tool Operators Salary in Sherman-Denison, TX
Computer Numerically Controlled Tool Operators in Sherman-Denison, TX make a median of $45,060 a year, or about $21.66 an hour. The range runs from $33K at the entry level to $61K for experienced workers. Cost of living is below average (RPP 93.77), which stretches that salary to about $48,054 in buying power. A 2-bedroom apartment runs $1,351/month — about 41.7% of take-home, which is tight.
So what does $45K get you in Sherman-Denison?
Groceries, utilities, transportation, and healthcare scaled from national averages by Sherman-Denison’s Regional Price Parity (93.77). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool operators
Sponsored links — AffordMap may earn a commission at no cost to you. Learn more
Compensation breakdown
Annual earnings by percentile, Sherman-Denison, TX
Entry-level computer numerically controlled tool operators (10th percentile) start around $33K. Mid-career wages sit at $45K. Top earners bring in $61K or more, a $28K spread from bottom to top.
Computer Numerically Controlled Tool Operators pay across states
Median income ranked highest to lowest, compared to the national figure
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $104K | +108% | 1,780 |
| Massachusetts | $62K | +24% | 2,440 |
| North Dakota | $62K | +23% | 270 |
| Maine | $59K | +19% | 750 |
| New Jersey | $57K | +14% | 2,010 |
| Pennsylvania | $56K | +11% | 10,700 |
| Wisconsin | $56K | +11% | 10,760 |
| New Hampshire | $55K | +11% | 1,970 |
| California | $55K | +11% | 18,870 |
| Minnesota | $54K | +8% | 4,020 |
| Connecticut | $54K | +8% | 3,310 |
| Wyoming | $53K | +7% | 70 |
| Vermont | $53K | +6% | 1,080 |
| North Carolina | $53K | +6% | 3,870 |
| Maryland | $52K | +4% | 1,790 |
| Oregon | $51K | +3% | 3,070 |
| Rhode Island | $51K | +2% | 400 |
| New York | $51K | +1% | 5,500 |
| South Dakota | $50K | +1% | 1,450 |
| Louisiana | $50K | +1% | 520 |
| Nevada | $50K | +1% | 390 |
| Iowa | $50K | +1% | 4,710 |
| Nebraska | $50K | +0% | 970 |
| South Carolina | $50K | -0% | 2,950 |
| Alabama | $49K | -1% | 3,530 |
| Missouri | $49K | -1% | 2,950 |
| Oklahoma | $49K | -2% | 1,840 |
| Arkansas | $49K | -2% | 1,640 |
| Tennessee | $49K | -3% | 2,210 |
| Arizona | $49K | -3% | 1,810 |
| Ohio | $48K | -4% | 22,980 |
| Illinois | $48K | -4% | 9,400 |
| Kentucky | $48K | -4% | 1,580 |
| Georgia | $48K | -5% | 2,200 |
| Indiana | $48K | -5% | 8,050 |
| Delaware | $48K | -5% | 120 |
| Virginia | $48K | -5% | 1,880 |
| Kansas | $48K | -5% | 2,220 |
| Idaho | $47K | -5% | 500 |
| Montana | $47K | -6% | 390 |
| Texas | $47K | -6% | 13,590 |
| Michigan | $47K | -7% | 8,200 |
| West Virginia | $46K | -8% | 210 |
| Utah | $46K | -8% | 960 |
| Florida | $45K | -9% | 4,590 |
| New Mexico | $44K | -13% | 40 |
| Mississippi | $40K | -20% | 1,210 |
Showing 1–10 of 47 states
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool operators salary changes
BLS updates this data quarterly. We'll email you when Sherman-Denison numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
How much do computer numerically controlled tool operators make in Sherman-Denison, TX?
The median is $45,060 a year, that works out to about $22 an hour. But the range is wide: entry-level workers start around $32,510, and experienced computer numerically controlled tool operators can clear $60,700. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $45K enough to live in Sherman-Denison?
On that salary, you'd take home roughly $3,187/month after taxes. A 2-bedroom here rents for about $1,351/month, which eats 42.4% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool operators salary go in Sherman-Denison?
Sherman-Denison has a Regional Price Parity of 93.77 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool operators salary is worth about $48,054 in national-average purchasing power.
Where do computer numerically controlled tool operators get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.