Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Bridgeport-Stamford-Danbury, CT make a median of $87,880 a year, or about $42.25 an hour. The range runs from $59K at the entry level to $124K for experienced workers. Prices run high here (RPP 106.86), so that salary is closer to $82,238 in real purchasing power. A 2-bedroom apartment runs $2,511/month, about 45.5% of take-home, which is tight.
So what does $88K get you in Bridgeport-Stamford-Danbury?
Groceries, utilities, transportation, and healthcare scaled from national averages by Bridgeport-Stamford-Danbury’s Regional Price Parity (106.86). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Bridgeport-Stamford-Danbury
Bridgeport-Stamford-Danbury sits well above the national pay line for computer numerically controlled tool programmers, local pay runs about 29% higher than the U.S. median of $68K. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $2,511/month, which is 45.8% of the median worker's take-home, past the 30% guideline most planners use. Cost-of-living overall is 7% above the national average (BEA RPP 106.86), so groceries and services cost more too. The pay premium is real, but so are the offsets.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Bridgeport-Stamford-Danbury, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Hartford-West Hartford-East Hartford | $89K | $87K |
| Waterbury-Shelton | $84K | $84K |
| New Haven | $83K | $80K |
| New York-Newark-Jersey City | $71K | $63K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Bridgeport-Stamford-Danbury, CT
Entry-level computer numerically controlled tool programmers (10th percentile) start around $59K. Mid-career wages sit at $88K. Top earners bring in $124K or more, a $65K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Bridgeport-Stamford-Danbury numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Bridgeport-Stamford-Danbury?
It’s a stretch — at the median salary of $88K, rent takes 45.8% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $2,511/month. The 30% guideline puts the comfortable ceiling at roughly $1,600/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Bridgeport-Stamford-Danbury?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $59K/year. Take-home on that works out to about $3,560/month. At HUD’s $2,511/month FMR, rent would take 71% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Bridgeport-Stamford-Danbury?
Local pay is 29% above the national median — $88K here vs. $68K nationally. Keep in mind cost of living here is 7% above the national average, which offsets some of that premium.
How does Bridgeport-Stamford-Danbury compare to the national average for computer numerically controlled tool programmers?
Bridgeport-Stamford-Danbury pays $88K median vs. the U.S. average of $68K — that’s +29%. After adjusting for local cost of living (RPP 106.86), the purchasing-power equivalent is $82K — still ahead of the national median.
How much do computer numerically controlled tool programmers make in Bridgeport-Stamford-Danbury, CT?
The median is $87,880 a year, that works out to about $42 an hour. But the range is wide: entry-level workers start around $59,340, and experienced computer numerically controlled tool programmers can clear $124,130. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $88K enough to live in Bridgeport-Stamford-Danbury?
On that salary, you'd take home roughly $5,486/month after taxes. A 2-bedroom here rents for about $2,511/month, which eats 45.8% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Bridgeport-Stamford-Danbury?
Bridgeport-Stamford-Danbury has a Regional Price Parity of 106.86 (100 is the national average). Prices are above average here, so your dollar buys less than the same salary would in a cheaper metro. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $82,238 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.