Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Grand Rapids-Wyoming-Kentwood, MI make a median of $63,560 a year, or about $30.56 an hour. The range runs from $50K at the entry level to $92K for experienced workers. Adjusted for local prices (RPP 95.55), that's roughly $66,520 in purchasing power. A 2-bedroom apartment runs $1,519/month, about 36.4% of take-home, which is tight.
So what does $64K get you in Grand Rapids-Wyoming-Kentwood?
Groceries, utilities, transportation, and healthcare scaled from national averages by Grand Rapids-Wyoming-Kentwood’s Regional Price Parity (95.55). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Grand Rapids-Wyoming-Kentwood
Computer numerically controlled tool programmers pay in Grand Rapids-Wyoming-Kentwood tracks closely to the national median, $64K locally vs. $68K nationwide, a 7% difference. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,519/month, which is 36.2% of the median worker's take-home, past the 30% guideline most planners use. Cost of living (RPP 95.55) is near the national average, so spending patterns here track the typical American budget fairly closely. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Grand Rapids-Wyoming-Kentwood, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Detroit-Warren-Dearborn | $66K | $66K |
| Kalamazoo-Portage | $62K | $65K |
| Lansing-East Lansing | $69K | $72K |
| Muskegon-Norton Shores | $61K | $66K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Grand Rapids-Wyoming-Kentwood, MI
Entry-level computer numerically controlled tool programmers (10th percentile) start around $50K. Mid-career wages sit at $64K. Top earners bring in $92K or more, a $42K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Grand Rapids-Wyoming-Kentwood numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Grand Rapids-Wyoming-Kentwood?
It’s a stretch — at the median salary of $64K, rent takes 36.2% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,519/month. The 30% guideline puts the comfortable ceiling at roughly $1,300/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Grand Rapids-Wyoming-Kentwood?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $50K/year. Take-home on that works out to about $2,993/month. At HUD’s $1,519/month FMR, rent would take 51% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Grand Rapids-Wyoming-Kentwood?
Pay here is roughly in line with the national average — $64K locally vs. $68K nationally, a 7% difference.
How does Grand Rapids-Wyoming-Kentwood compare to the national average for computer numerically controlled tool programmers?
Grand Rapids-Wyoming-Kentwood pays $64K median vs. the U.S. average of $68K — that’s -7%. After adjusting for local cost of living (RPP 95.55), the purchasing-power equivalent is $67K — below the national median.
How much do computer numerically controlled tool programmers make in Grand Rapids-Wyoming-Kentwood, MI?
The median is $63,560 a year, that works out to about $31 an hour. But the range is wide: entry-level workers start around $49,890, and experienced computer numerically controlled tool programmers can clear $91,910. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $64K enough to live in Grand Rapids-Wyoming-Kentwood?
On that salary, you'd take home roughly $4,200/month after taxes. A 2-bedroom here rents for about $1,519/month, which eats 36.2% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Grand Rapids-Wyoming-Kentwood?
Grand Rapids-Wyoming-Kentwood has a Regional Price Parity of 95.55 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $66,520 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.