Computer Numerically Controlled Tool Programmers Salary
Computer Numerically Controlled Tool Programmers in Louisville/Jefferson County, KY-IN make a median of $61,600 a year, or about $29.62 an hour. The range runs from $51K at the entry level to $86K for experienced workers. Cost of living is below average (RPP 93.07), which stretches that salary to about $66,187 in buying power. A 2-bedroom apartment runs $1,272/month, about 31.4% of take-home, which is tight.
So what does $62K get you in Louisville/Jefferson County?
Groceries, utilities, transportation, and healthcare scaled from national averages by Louisville/Jefferson County’s Regional Price Parity (93.07). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About computer numerically controlled tool programmers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Louisville/Jefferson County
Computer numerically controlled tool programmers pay in Louisville/Jefferson County tracks closely to the national median, $62K locally vs. $68K nationwide, a 10% difference. Rent runs $1,272/month for a 2-bedroom (HUD FMR), taking 31.1% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 93.07 (national = 100), meaning everyday costs run about 7% cheaper here. Your dollar stretches further than the headline salary suggests. Pay and costs are both near average, leaving limited margin for savings at the median wage.
Compared to nearby metros
Median pay for computer numerically controlled tool programmers in metros near Louisville/Jefferson County, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Bowling Green | $59K | $65K |
| Chicago-Naperville-Elgin | $69K | $67K |
| Cleveland | $64K | $68K |
| Indianapolis-Carmel-Greenwood | $57K | $60K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Louisville/Jefferson County, KY-IN
Entry-level computer numerically controlled tool programmers (10th percentile) start around $51K. Mid-career wages sit at $62K. Top earners bring in $86K or more, a $35K spread from bottom to top.
Computer Numerically Controlled Tool Programmers pay across states
Median income ranked highest to lowest, compared to the national figure
View Computer Numerically Controlled Tool Programmers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Connecticut | $86K | +27% | 500 |
| California | $82K | +21% | 2,990 |
| Massachusetts | $82K | +20% | 680 |
| Washington | $81K | +20% | 660 |
| Missouri | $78K | +15% | 430 |
| Vermont | $78K | +14% | 140 |
| Kansas | $76K | +12% | 680 |
| North Dakota | $76K | +12% | 40 |
| Oregon | $75K | +10% | 500 |
| Arizona | $74K | +9% | 470 |
| Virginia | $74K | +9% | 330 |
| Minnesota | $74K | +9% | 1,250 |
| Maine | $73K | +7% | 50 |
| New Hampshire | $72K | +5% | 290 |
| Montana | $71K | +4% | 60 |
| New Jersey | $70K | +3% | 520 |
| Tennessee | $70K | +2% | 330 |
| Colorado | $70K | +2% | 410 |
| Texas | $70K | +2% | 1,930 |
| South Carolina | $69K | +2% | 340 |
| Illinois | $69K | +1% | 1,070 |
| New York | $69K | +1% | 1,140 |
| Wisconsin | $67K | -1% | 1,610 |
| South Dakota | $67K | -2% | 80 |
| Pennsylvania | $66K | -3% | 1,080 |
| Maryland | $66K | -4% | 200 |
| Utah | $66K | -4% | 150 |
| Oklahoma | $66K | -4% | 330 |
| Kentucky | $65K | -5% | 230 |
| Michigan | $65K | -5% | 2,300 |
| Alabama | $65K | -5% | 420 |
| North Carolina | $64K | -6% | 760 |
| Florida | $64K | -6% | 770 |
| Idaho | $64K | -7% | 120 |
| Indiana | $63K | -7% | 1,490 |
| Nebraska | $63K | -7% | 70 |
| Rhode Island | $63K | -8% | 70 |
| Georgia | $61K | -10% | 420 |
| Ohio | $60K | -12% | 2,370 |
| Iowa | $58K | -15% | 640 |
| Nevada | $57K | -16% | 130 |
| Arkansas | $56K | -17% | 210 |
| Mississippi | $50K | -26% | 140 |
Showing 1–10 of 43 states with published data
BLS does not publish data for every state when sample sizes are too small
Track computer numerically controlled tool programmers salary changes
BLS updates this data quarterly. We'll email you when Louisville/Jefferson County numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a computer numerically controlled tool programmer afford a 2BR apartment alone in Louisville/Jefferson County?
It’s a stretch — at the median salary of $62K, rent takes 31.1% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,272/month. The 30% guideline puts the comfortable ceiling at roughly $1,200/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for computer numerically controlled tool programmers in Louisville/Jefferson County?
The 10th-percentile wage — what new computer numerically controlled tool programmers typically earn — is $51K/year. Take-home on that works out to about $3,034/month. At HUD’s $1,272/month FMR, rent would take 42% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is computer numerically controlled tool programmer a high-paying job in Louisville/Jefferson County?
Pay here is roughly in line with the national average — $62K locally vs. $68K nationally, a 10% difference.
How does Louisville/Jefferson County compare to the national average for computer numerically controlled tool programmers?
Louisville/Jefferson County pays $62K median vs. the U.S. average of $68K — that’s -10%. After adjusting for local cost of living (RPP 93.07), the purchasing-power equivalent is $66K — below the national median.
How much do computer numerically controlled tool programmers make in Louisville/Jefferson County, KY-IN?
The median is $61,600 a year, that works out to about $30 an hour. But the range is wide: entry-level workers start around $50,560, and experienced computer numerically controlled tool programmers can clear $85,810. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $62K enough to live in Louisville/Jefferson County?
On that salary, you'd take home roughly $4,089/month after taxes. A 2-bedroom here rents for about $1,272/month, which eats 31.1% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a computer numerically controlled tool programmers salary go in Louisville/Jefferson County?
Louisville/Jefferson County has a Regional Price Parity of 93.07 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median computer numerically controlled tool programmers salary is worth about $66,187 in national-average purchasing power.
Where do computer numerically controlled tool programmers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.