Cutting and Slicing Machine Setters, Operators, and Tenders Salary in Little Rock-North Little Rock-Conway, AR
Cutting and Slicing Machine Setters, Operators, and Tenders in Little Rock-North Little Rock-Conway, AR make a median of $46,820 a year, or about $22.51 an hour. The range runs from $34K at the entry level to $65K for experienced workers. Cost of living is below average (RPP 89.36), which stretches that salary to about $52,395 in buying power. A 2-bedroom apartment runs $1,147/month — about 35.9% of take-home, which is tight.
So what does $47K get you in Little Rock-North Little Rock-Conway?
Groceries, utilities, transportation, and healthcare scaled from national averages by Little Rock-North Little Rock-Conway’s Regional Price Parity (89.36). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About cutting and slicing machine setters, operators, and tenders
Sponsored links — AffordMap may earn a commission at no cost to you. Learn more
Compensation breakdown
Annual earnings by percentile, Little Rock-North Little Rock-Conway, AR
Entry-level cutting and slicing machine setters, operators, and tenders (10th percentile) start around $34K. Mid-career wages sit at $47K. Top earners bring in $65K or more, a $31K spread from bottom to top.
Cutting and Slicing Machine Setters, Operators, and Tenders pay across states
Median income ranked highest to lowest, compared to the national figure
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Minnesota | $56K | +23% | 1,330 |
| Illinois | $52K | +15% | 1,390 |
| Iowa | $52K | +14% | 880 |
| New Hampshire | $52K | +14% | 110 |
| Wisconsin | $51K | +11% | 1,620 |
| Missouri | $50K | +10% | 1,210 |
| Maine | $49K | +7% | 230 |
| Oregon | $49K | +7% | 900 |
| Washington | $48K | +6% | 980 |
| Nevada | $48K | +5% | 280 |
| Mississippi | $48K | +5% | 510 |
| Pennsylvania | $48K | +4% | 1,720 |
| Idaho | $47K | +3% | 100 |
| North Dakota | $47K | +3% | 60 |
| New York | $47K | +3% | 2,160 |
| Nebraska | $47K | +2% | 410 |
| Kansas | $47K | +2% | 960 |
| South Carolina | $46K | +2% | 1,030 |
| Kentucky | $46K | +1% | 1,020 |
| New Jersey | $46K | +1% | 1,000 |
| Montana | $46K | +0% | 140 |
| Arkansas | $46K | +0% | 890 |
| Indiana | $46K | -0% | 2,270 |
| Arizona | $45K | -1% | 710 |
| Ohio | $45K | -1% | 3,670 |
| Utah | $45K | -2% | 620 |
| Michigan | $44K | -3% | 820 |
| California | $44K | -3% | 3,830 |
| Virginia | $44K | -4% | 980 |
| Vermont | $44K | -4% | 220 |
| Tennessee | $44K | -4% | 970 |
| Maryland | $44K | -4% | 360 |
| South Dakota | $44K | -5% | 440 |
| North Carolina | $43K | -6% | 2,950 |
| Connecticut | $42K | -8% | 520 |
| Florida | $42K | -8% | 1,830 |
| Massachusetts | $42K | -9% | 810 |
| Texas | $41K | -11% | 3,200 |
| Rhode Island | $40K | -12% | 270 |
| Louisiana | $40K | -12% | 90 |
| Georgia | $40K | -13% | 1,640 |
| Alaska | $39K | -14% | 60 |
| Alabama | $37K | -18% | 590 |
| West Virginia | $37K | -18% | 160 |
| Oklahoma | $36K | -21% | 720 |
| New Mexico | $32K | -29% | 230 |
Showing 1–10 of 46 states
BLS does not publish data for every state when sample sizes are too small
Track cutting and slicing machine setters, operators, and tenders salary changes
BLS updates this data quarterly. We'll email you when Little Rock-North Little Rock-Conway numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
How much do cutting and slicing machine setters, operators, and tenders make in Little Rock-North Little Rock-Conway, AR?
The median is $46,820 a year, that works out to about $23 an hour. But the range is wide: entry-level workers start around $34,430, and experienced cutting and slicing machine setters, operators, and tenders can clear $65,100. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $47K enough to live in Little Rock-North Little Rock-Conway?
On that salary, you'd take home roughly $3,167/month after taxes. A 2-bedroom here rents for about $1,147/month, which eats 36.2% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a cutting and slicing machine setters, operators, and tenders salary go in Little Rock-North Little Rock-Conway?
Little Rock-North Little Rock-Conway has a Regional Price Parity of 89.36 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median cutting and slicing machine setters, operators, and tenders salary is worth about $52,395 in national-average purchasing power.
Where do cutting and slicing machine setters, operators, and tenders get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.