Cutting and Slicing Machine Setters, Operators, and Tenders Salary
Cutting and Slicing Machine Setters, Operators, and Tenders in St. Cloud, MN make a median of $58,450 a year, or about $28.1 an hour. The range runs from $47K at the entry level to $60K for experienced workers. Cost of living is below average (RPP 87.63), which stretches that salary to about $66,701 in buying power. A 2-bedroom apartment runs $1,206/month, about 31.6% of take-home, which is tight.
So what does $58K get you in St. Cloud?
Groceries, utilities, transportation, and healthcare scaled from national averages by St. Cloud’s Regional Price Parity (87.63). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About cutting and slicing machine setters, operators, and tenders
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in St. Cloud
St. Cloud sits well above the national pay line for cutting and slicing machine setters, operators, and tenders, local pay runs about 26% higher than the U.S. median of $47K. Rent runs $1,206/month for a 2-bedroom (HUD FMR), taking 31.2% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 87.63 (national = 100), meaning everyday costs run about 12% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for cutting and slicing machine setters, operators, and tenders in metros near St. Cloud, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Minneapolis-St. Paul-Bloomington | $63K | $60K |
| Milwaukee-Waukesha | $48K | $50K |
| Des Moines-West Des Moines | $53K | $58K |
| Sioux Falls | $45K | $50K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, St. Cloud, MN
Entry-level cutting and slicing machine setters, operators, and tenders (10th percentile) start around $47K. Mid-career wages sit at $58K. Top earners bring in $60K or more, a $14K spread from bottom to top.
Cutting and Slicing Machine Setters, Operators, and Tenders pay across states
Median income ranked highest to lowest, compared to the national figure
View Cutting and Slicing Machine Setters, Operators, and Tenders salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Minnesota | $58K | +25% | 1,130 |
| Vermont | $52K | +12% | 100 |
| Colorado | $52K | +11% | 700 |
| Montana | $52K | +11% | 100 |
| Oregon | $51K | +10% | 990 |
| Missouri | $51K | +9% | 1,120 |
| Washington | $50K | +8% | 760 |
| New Hampshire | $50K | +8% | 90 |
| Illinois | $50K | +7% | 1,770 |
| New York | $50K | +7% | 1,870 |
| Iowa | $50K | +7% | 920 |
| Maine | $49K | +6% | 160 |
| New Jersey | $49K | +4% | 1,040 |
| Ohio | $48K | +4% | 3,000 |
| Nebraska | $48K | +4% | 530 |
| Kentucky | $48K | +3% | 900 |
| Wisconsin | $48K | +3% | 1,300 |
| North Dakota | $47K | +2% | 70 |
| South Carolina | $47K | +2% | 730 |
| Arkansas | $47K | +2% | 800 |
| Pennsylvania | $47K | +1% | 1,630 |
| Idaho | $47K | +1% | 160 |
| Arizona | $47K | +0% | 760 |
| Alaska | $46K | -1% | 30 |
| Indiana | $46K | -1% | 2,110 |
| California | $46K | -1% | 3,080 |
| Rhode Island | $46K | -1% | 210 |
| Utah | $46K | -2% | 740 |
| South Dakota | $45K | -3% | 460 |
| Maryland | $45K | -4% | 280 |
| Virginia | $45K | -4% | 840 |
| Kansas | $45K | -4% | 760 |
| Michigan | $45K | -4% | 730 |
| Connecticut | $45K | -4% | 450 |
| Georgia | $44K | -5% | 1,230 |
| Tennessee | $44K | -5% | 1,260 |
| Massachusetts | $44K | -6% | 1,280 |
| North Carolina | $44K | -6% | 3,100 |
| Nevada | $43K | -7% | 340 |
| Texas | $42K | -9% | 3,650 |
| Mississippi | $42K | -11% | 710 |
| Louisiana | $41K | -12% | 110 |
| Florida | $41K | -13% | 1,370 |
| Alabama | $40K | -15% | 590 |
| West Virginia | $38K | -19% | 160 |
| Oklahoma | $38K | -19% | 620 |
| New Mexico | $33K | -30% | 200 |
Showing 1–10 of 47 states
BLS does not publish data for every state when sample sizes are too small
Track cutting and slicing machine setters, operators, and tenders salary changes
BLS updates this data quarterly. We'll email you when St. Cloud numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a cutting and slicing machine setters, operators, and tender afford a 2BR apartment alone in St. Cloud?
It’s a stretch — at the median salary of $58K, rent takes 31.2% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,206/month. The 30% guideline puts the comfortable ceiling at roughly $1,200/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for cutting and slicing machine setters, operators, and tenders in St. Cloud?
The 10th-percentile wage — what new cutting and slicing machine setters, operators, and tenders typically earn — is $47K/year. Take-home on that works out to about $2,808/month. At HUD’s $1,206/month FMR, rent would take 43% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is cutting and slicing machine setters, operators, and tender a high-paying job in St. Cloud?
Local pay is 26% above the national median — $58K here vs. $47K nationally.
How does St. Cloud compare to the national average for cutting and slicing machine setters, operators, and tenders?
St. Cloud pays $58K median vs. the U.S. average of $47K — that’s +26%. After adjusting for local cost of living (RPP 87.63), the purchasing-power equivalent is $67K — still ahead of the national median.
How much do cutting and slicing machine setters, operators, and tenders make in St. Cloud, MN?
The median is $58,450 a year, that works out to about $28 an hour. But the range is wide: entry-level workers start around $46,800, and experienced cutting and slicing machine setters, operators, and tenders can clear $60,320. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $58K enough to live in St. Cloud?
On that salary, you'd take home roughly $3,871/month after taxes. A 2-bedroom here rents for about $1,206/month, which eats 31.2% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a cutting and slicing machine setters, operators, and tenders salary go in St. Cloud?
St. Cloud has a Regional Price Parity of 87.63 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median cutting and slicing machine setters, operators, and tenders salary is worth about $66,701 in national-average purchasing power.
Where do cutting and slicing machine setters, operators, and tenders get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.