Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic Salary
In Dallas-Fort Worth-Arlington, TX, extruding and drawing machine setters, operators, and tenders, metal and plastics earn $48,590 at the median, or about $23.36 an hour. The range runs from $38K at the entry level to $73K for experienced workers. Adjusted for local prices (RPP 103.09), that's roughly $47,134 in purchasing power. A 2-bedroom apartment runs $1,931/month, about 55.2% of take-home, which is tight.
So what does $49K get you in Dallas-Fort Worth-Arlington?
Groceries, utilities, transportation, and healthcare scaled from national averages by Dallas-Fort Worth-Arlington’s Regional Price Parity (103.09). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About extruding and drawing machine setters, operators, and tenders, metal and plastics
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Dallas-Fort Worth-Arlington
Extruding and drawing machine setters, operators, and tenders, metal and plastic pay in Dallas-Fort Worth-Arlington tracks closely to the national median, $49K locally vs. $48K nationwide, a 2% difference. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,931/month, which is 56.4% of the median worker's take-home, past the 30% guideline most planners use. Cost of living (RPP 103.09) is near the national average, so spending patterns here track the typical American budget fairly closely. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for extruding and drawing machine setters, operators, and tenders, metal and plastics in metros near Dallas-Fort Worth-Arlington, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Houston-Pasadena-The Woodlands | $43K | $43K |
| El Paso | $44K | $49K |
| San Antonio-New Braunfels | $41K | $43K |
| Little Rock-North Little Rock-Conway | $49K | $54K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Dallas-Fort Worth-Arlington, TX
Entry-level extruding and drawing machine setters, operators, and tenders, metal and plastics (10th percentile) start around $38K. Mid-career wages sit at $49K. Top earners bring in $73K or more, a $35K spread from bottom to top.
Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic pay across states
Median income ranked highest to lowest, compared to the national figure
View Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Rhode Island | $61K | +29% | 430 |
| Vermont | $59K | +24% | 60 |
| North Carolina | $53K | +12% | 2,950 |
| Nebraska | $52K | +10% | 510 |
| Minnesota | $52K | +9% | 900 |
| New Jersey | $51K | +7% | 750 |
| Pennsylvania | $51K | +7% | 2,960 |
| Colorado | $51K | +7% | 240 |
| Massachusetts | $50K | +6% | 1,490 |
| Connecticut | $50K | +5% | 1,000 |
| Wisconsin | $50K | +5% | 3,190 |
| New Hampshire | $50K | +5% | 580 |
| Arkansas | $50K | +5% | 1,270 |
| Kentucky | $50K | +5% | 1,400 |
| Oregon | $50K | +4% | 440 |
| South Dakota | $50K | +4% | 50 |
| Indiana | $49K | +4% | 3,740 |
| South Carolina | $49K | +3% | 2,000 |
| Utah | $49K | +3% | 410 |
| New York | $49K | +3% | 1,400 |
| Illinois | $49K | +2% | 2,750 |
| Georgia | $48K | +1% | 2,560 |
| Louisiana | $48K | +0% | 580 |
| Alabama | $48K | -0% | 1,200 |
| Tennessee | $48K | -0% | 2,980 |
| Iowa | $47K | -1% | 450 |
| Washington | $47K | -1% | 1,080 |
| Maryland | $47K | -2% | 270 |
| Maine | $47K | -2% | 90 |
| Ohio | $46K | -3% | 5,020 |
| Kansas | $46K | -3% | 1,140 |
| Delaware | $46K | -3% | 470 |
| Missouri | $46K | -3% | 1,040 |
| Wyoming | $46K | -4% | 80 |
| Texas | $46K | -4% | 4,070 |
| California | $46K | -4% | 3,870 |
| New Mexico | $46K | -4% | 50 |
| Virginia | $45K | -5% | 1,490 |
| Michigan | $45K | -5% | 1,800 |
| Arizona | $45K | -6% | 910 |
| West Virginia | $45K | -7% | 540 |
| Mississippi | $44K | -7% | 550 |
| Nevada | $44K | -7% | 260 |
| Florida | $40K | -17% | 1,190 |
| Oklahoma | $39K | -19% | 490 |
| Idaho | $35K | -27% | N/A |
Showing 1–10 of 46 states with published data
BLS does not publish data for every state when sample sizes are too small
Track extruding and drawing machine setters, operators, and tenders, metal and plastic salary changes
BLS updates this data quarterly. We'll email you when Dallas-Fort Worth-Arlington numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a extruding and drawing machine setters, operators, and tenders, metal and plastic afford a 2BR apartment alone in Dallas-Fort Worth-Arlington?
It’s a stretch — at the median salary of $49K, rent takes 56.4% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,931/month. The 30% guideline puts the comfortable ceiling at roughly $1,000/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for extruding and drawing machine setters, operators, and tenders, metal and plastics in Dallas-Fort Worth-Arlington?
The 10th-percentile wage — what new extruding and drawing machine setters, operators, and tenders, metal and plastics typically earn — is $38K/year. Take-home on that works out to about $2,293/month. At HUD’s $1,931/month FMR, rent would take 84% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is extruding and drawing machine setters, operators, and tenders, metal and plastic a high-paying job in Dallas-Fort Worth-Arlington?
Pay here is roughly in line with the national average — $49K locally vs. $48K nationally, a 2% difference.
How does Dallas-Fort Worth-Arlington compare to the national average for extruding and drawing machine setters, operators, and tenders, metal and plastics?
Dallas-Fort Worth-Arlington pays $49K median vs. the U.S. average of $48K — that’s +2%. After adjusting for local cost of living (RPP 103.09), the purchasing-power equivalent is $47K — below the national median.
How much do extruding and drawing machine setters, operators, and tenders, metal and plastics make in Dallas-Fort Worth-Arlington, TX?
The median is $48,590 a year, that works out to about $23 an hour. But the range is wide: entry-level workers start around $38,210, and experienced extruding and drawing machine setters, operators, and tenders, metal and plastics can clear $73,060. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $49K enough to live in Dallas-Fort Worth-Arlington?
On that salary, you'd take home roughly $3,423/month after taxes. A 2-bedroom here rents for about $1,931/month, which eats 56.4% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a extruding and drawing machine setters, operators, and tenders, metal and plastic salary go in Dallas-Fort Worth-Arlington?
Dallas-Fort Worth-Arlington has a Regional Price Parity of 103.09 (100 is the national average). Prices are above average here, so your dollar buys less than the same salary would in a cheaper metro. After cost-of-living adjustment, the median extruding and drawing machine setters, operators, and tenders, metal and plastic salary is worth about $47,134 in national-average purchasing power.
Where do extruding and drawing machine setters, operators, and tenders, metal and plastics get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.