Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders Salary
In Lincoln, NE, extruding, forming, pressing, and compacting machine setters, operators, and tenders earn $61,820 at the median, or about $29.72 an hour. The range runs from $40K at the entry level to $65K for experienced workers. Cost of living is below average (RPP 91.58), which stretches that salary to about $67,504 in buying power. Rent on a 2-bedroom averages $1,141/month, or 28.1% of estimated take-home pay.
So what does $62K get you in Lincoln?
Groceries, utilities, transportation, and healthcare scaled from national averages by Lincoln’s Regional Price Parity (91.58). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About extruding, forming, pressing, and compacting machine setters, operators, and tenders
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Lincoln
Lincoln sits well above the national pay line for extruding, forming, pressing, and compacting machine setters, operators, and tenders, local pay runs about 35% higher than the U.S. median of $46K. Rent runs $1,141/month for a 2-bedroom (HUD FMR), taking 27.8% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 91.58 (national = 100), meaning everyday costs run about 8% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for extruding, forming, pressing, and compacting machine setters, operators, and tenders in metros near Lincoln, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Omaha | $46K | $50K |
| St. Louis | $56K | $59K |
| Sioux Falls | $39K | $43K |
| Denver-Aurora-Centennial | $50K | , |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Lincoln, NE
Entry-level extruding, forming, pressing, and compacting machine setters, operators, and tenders (10th percentile) start around $40K. Mid-career wages sit at $62K. Top earners bring in $65K or more, a $24K spread from bottom to top.
Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders pay across states
Median income ranked highest to lowest, compared to the national figure
View Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Maine | $58K | +27% | 140 |
| Pennsylvania | $54K | +17% | 2,450 |
| Vermont | $52K | +14% | 160 |
| Minnesota | $52K | +14% | 560 |
| South Carolina | $52K | +13% | 2,460 |
| West Virginia | $51K | +11% | 180 |
| Nevada | $50K | +9% | N/A |
| Virginia | $49K | +8% | 1,810 |
| Iowa | $49K | +8% | 500 |
| Colorado | $49K | +7% | 280 |
| Utah | $49K | +7% | 250 |
| Nebraska | $49K | +7% | 750 |
| Oregon | $48K | +6% | 370 |
| Arkansas | $48K | +6% | 2,190 |
| New Hampshire | $48K | +4% | 410 |
| Missouri | $47K | +4% | 1,040 |
| Illinois | $47K | +4% | 1,690 |
| California | $47K | +3% | 4,210 |
| Massachusetts | $47K | +3% | 950 |
| New Jersey | $47K | +3% | 1,880 |
| Ohio | $47K | +3% | 3,970 |
| Indiana | $47K | +2% | 3,150 |
| Maryland | $47K | +2% | 280 |
| Mississippi | $47K | +2% | 660 |
| Arizona | $46K | +1% | 700 |
| Wisconsin | $46K | +1% | 1,730 |
| North Dakota | $46K | +1% | 270 |
| Connecticut | $46K | +1% | 240 |
| Georgia | $46K | -0% | 1,150 |
| New York | $45K | -2% | 3,260 |
| Washington | $45K | -3% | 750 |
| Kansas | $44K | -3% | 600 |
| Louisiana | $44K | -3% | 200 |
| South Dakota | $43K | -6% | 610 |
| North Carolina | $43K | -6% | 3,420 |
| Oklahoma | $42K | -8% | 1,310 |
| Tennessee | $42K | -8% | 4,210 |
| Florida | $40K | -13% | 780 |
| Michigan | $40K | -13% | 1,970 |
| Rhode Island | $39K | -14% | 80 |
| Alabama | $39K | -16% | 1,510 |
| Idaho | $39K | -16% | 210 |
| Texas | $38K | -18% | 3,420 |
| New Mexico | $37K | -20% | 80 |
| Kentucky | $36K | -21% | 1,690 |
Showing 1–10 of 45 states with published data
BLS does not publish data for every state when sample sizes are too small
Track extruding, forming, pressing, and compacting machine setters, operators, and tenders salary changes
BLS updates this data quarterly. We'll email you when Lincoln numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a extruding, forming, pressing, and compacting machine setters, operators, and tender afford a 2BR apartment alone in Lincoln?
Yes — at the median salary of $62K, rent takes 27.8% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,141/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for extruding, forming, pressing, and compacting machine setters, operators, and tenders in Lincoln?
The 10th-percentile wage — what new extruding, forming, pressing, and compacting machine setters, operators, and tenders typically earn — is $40K/year. Take-home on that works out to about $2,420/month. At HUD’s $1,141/month FMR, rent would take 47% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is extruding, forming, pressing, and compacting machine setters, operators, and tender a high-paying job in Lincoln?
Local pay is 35% above the national median — $62K here vs. $46K nationally.
How does Lincoln compare to the national average for extruding, forming, pressing, and compacting machine setters, operators, and tenders?
Lincoln pays $62K median vs. the U.S. average of $46K — that’s +35%. After adjusting for local cost of living (RPP 91.58), the purchasing-power equivalent is $68K — still ahead of the national median.
How much do extruding, forming, pressing, and compacting machine setters, operators, and tenders make in Lincoln, NE?
The median is $61,820 a year, that works out to about $30 an hour. But the range is wide: entry-level workers start around $40,340, and experienced extruding, forming, pressing, and compacting machine setters, operators, and tenders can clear $64,800. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $62K enough to live in Lincoln?
On that salary, you'd take home roughly $4,103/month after taxes. A 2-bedroom here rents for about $1,141/month, which eats 27.8% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a extruding, forming, pressing, and compacting machine setters, operators, and tenders salary go in Lincoln?
Lincoln has a Regional Price Parity of 91.58 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median extruding, forming, pressing, and compacting machine setters, operators, and tenders salary is worth about $67,504 in national-average purchasing power.
Where do extruding, forming, pressing, and compacting machine setters, operators, and tenders get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.