Tool and Die Makers Salary
In Greenville-Anderson-Greer, SC, tool and die makers earn $67,830 at the median, or about $32.61 an hour. The range runs from $37K at the entry level to $80K for experienced workers. Cost of living is below average (RPP 93.26), which stretches that salary to about $72,732 in buying power. Rent on a 2-bedroom averages $1,339/month, or 30% of estimated take-home pay.
So what does $68K get you in Greenville-Anderson-Greer?
Groceries, utilities, transportation, and healthcare scaled from national averages by Greenville-Anderson-Greer’s Regional Price Parity (93.26). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About tool and die makers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Greenville-Anderson-Greer
Tool and die makers pay in Greenville-Anderson-Greer tracks closely to the national median, $68K locally vs. $64K nationwide, a 6% difference. Rent runs $1,339/month for a 2-bedroom (HUD FMR), taking 30.1% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 93.26 (national = 100), meaning everyday costs run about 7% cheaper here. Your dollar stretches further than the headline salary suggests. Pay and costs are both near average, leaving limited margin for savings at the median wage.
Compared to nearby metros
Median pay for tool and die makers in metros near Greenville-Anderson-Greer, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Spartanburg | $61K | $67K |
| Charleston-North Charleston | $74K | $74K |
| Columbia | $71K | $75K |
| Charlotte-Concord-Gastonia | $62K | $64K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Greenville-Anderson-Greer, SC
Entry-level tool and die makers (10th percentile) start around $37K. Mid-career wages sit at $68K. Top earners bring in $80K or more, a $43K spread from bottom to top.
Tool and Die Makers pay across states
Median income ranked highest to lowest, compared to the national figure
View Tool and Die Makers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $109K | +71% | 1,510 |
| Kansas | $84K | +31% | 660 |
| Maine | $80K | +25% | 80 |
| Connecticut | $78K | +21% | 1,880 |
| California | $77K | +20% | 1,790 |
| New Jersey | $74K | +16% | 540 |
| Oregon | $74K | +15% | 300 |
| North Dakota | $73K | +14% | 70 |
| Minnesota | $71K | +11% | 1,150 |
| New Hampshire | $70K | +9% | 250 |
| Vermont | $69K | +8% | 140 |
| Nebraska | $69K | +8% | 360 |
| Wisconsin | $68K | +6% | 2,450 |
| New York | $68K | +6% | 1,270 |
| Indiana | $68K | +6% | 4,090 |
| Massachusetts | $67K | +5% | 850 |
| Kentucky | $67K | +4% | 1,900 |
| Oklahoma | $66K | +3% | 330 |
| Michigan | $66K | +2% | 9,420 |
| South Carolina | $65K | +2% | 870 |
| Iowa | $65K | +1% | 760 |
| Alabama | $65K | +1% | 690 |
| Virginia | $64K | +0% | 390 |
| Florida | $64K | -0% | 440 |
| Colorado | $64K | -0% | 160 |
| Rhode Island | $63K | -1% | 260 |
| Ohio | $62K | -3% | 5,520 |
| Nevada | $61K | -4% | 220 |
| Illinois | $61K | -4% | 5,220 |
| Pennsylvania | $61K | -5% | 3,380 |
| North Carolina | $61K | -5% | 1,580 |
| Missouri | $61K | -5% | 1,280 |
| Tennessee | $61K | -5% | 2,930 |
| Georgia | $60K | -6% | 850 |
| South Dakota | $60K | -7% | 60 |
| Arizona | $59K | -8% | 310 |
| Maryland | $58K | -9% | 70 |
| Mississippi | $58K | -9% | 300 |
| Idaho | $58K | -10% | 50 |
| Arkansas | $57K | -11% | 290 |
| Utah | $57K | -11% | 270 |
| Texas | $55K | -13% | 1,710 |
| New Mexico | $48K | -25% | 40 |
| Louisiana | $47K | -27% | 170 |
| West Virginia | $46K | -28% | 40 |
Showing 1–10 of 45 states with published data
BLS does not publish data for every state when sample sizes are too small
Track tool and die makers salary changes
BLS updates this data quarterly. We'll email you when Greenville-Anderson-Greer numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a tool and die maker afford a 2BR apartment alone in Greenville-Anderson-Greer?
It’s a stretch — at the median salary of $68K, rent takes 30.1% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,339/month. The 30% guideline puts the comfortable ceiling at roughly $1,300/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for tool and die makers in Greenville-Anderson-Greer?
The 10th-percentile wage — what new tool and die makers typically earn — is $37K/year. Take-home on that works out to about $2,246/month. At HUD’s $1,339/month FMR, rent would take 60% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is tool and die maker a high-paying job in Greenville-Anderson-Greer?
Pay here is roughly in line with the national average — $68K locally vs. $64K nationally, a 6% difference.
How does Greenville-Anderson-Greer compare to the national average for tool and die makers?
Greenville-Anderson-Greer pays $68K median vs. the U.S. average of $64K — that’s +6%. After adjusting for local cost of living (RPP 93.26), the purchasing-power equivalent is $73K — still ahead of the national median.
How much do tool and die makers make in Greenville-Anderson-Greer, SC?
The median is $67,830 a year, that works out to about $33 an hour. But the range is wide: entry-level workers start around $37,440, and experienced tool and die makers can clear $80,490. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $68K enough to live in Greenville-Anderson-Greer?
On that salary, you'd take home roughly $4,449/month after taxes. A 2-bedroom here rents for about $1,339/month, which eats 30.1% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a tool and die makers salary go in Greenville-Anderson-Greer?
Greenville-Anderson-Greer has a Regional Price Parity of 93.26 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median tool and die makers salary is worth about $72,732 in national-average purchasing power.
Where do tool and die makers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.