Tool and Die Makers Salary
In Staunton-Stuarts Draft, VA, tool and die makers earn $67,130 at the median, or about $32.27 an hour. The range runs from $50K at the entry level to $74K for experienced workers. Cost of living is below average (RPP 91.13), which stretches that salary to about $73,664 in buying power. Rent on a 2-bedroom averages $1,261/month, or 28.6% of estimated take-home pay.
So what does $67K get you in Staunton-Stuarts Draft?
Groceries, utilities, transportation, and healthcare scaled from national averages by Staunton-Stuarts Draft’s Regional Price Parity (91.13). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About tool and die makers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Staunton-Stuarts Draft
Tool and die makers pay in Staunton-Stuarts Draft tracks closely to the national median, $67K locally vs. $64K nationwide, a 5% difference. Rent runs $1,261/month for a 2-bedroom (HUD FMR), taking 28.9% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 91.13 (national = 100), meaning everyday costs run about 9% cheaper here. Your dollar stretches further than the headline salary suggests. Pay and costs are both near average, leaving limited margin for savings at the median wage.
Compared to nearby metros
Median pay for tool and die makers in metros near Staunton-Stuarts Draft, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Virginia Beach-Chesapeake-Norfolk | $64K | $65K |
| Richmond | $68K | $69K |
| Nashville-Davidson--Murfreesboro--Franklin | $69K | $72K |
| Louisville/Jefferson County | $75K | $81K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Staunton-Stuarts Draft, VA
Entry-level tool and die makers (10th percentile) start around $50K. Mid-career wages sit at $67K. Top earners bring in $74K or more, a $24K spread from bottom to top.
Tool and Die Makers pay across states
Median income ranked highest to lowest, compared to the national figure
View Tool and Die Makers salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $109K | +71% | 1,510 |
| Kansas | $84K | +31% | 660 |
| Maine | $80K | +25% | 80 |
| Connecticut | $78K | +21% | 1,880 |
| California | $77K | +20% | 1,790 |
| New Jersey | $74K | +16% | 540 |
| Oregon | $74K | +15% | 300 |
| North Dakota | $73K | +14% | 70 |
| Minnesota | $71K | +11% | 1,150 |
| New Hampshire | $70K | +9% | 250 |
| Vermont | $69K | +8% | 140 |
| Nebraska | $69K | +8% | 360 |
| Wisconsin | $68K | +6% | 2,450 |
| New York | $68K | +6% | 1,270 |
| Indiana | $68K | +6% | 4,090 |
| Massachusetts | $67K | +5% | 850 |
| Kentucky | $67K | +4% | 1,900 |
| Oklahoma | $66K | +3% | 330 |
| Michigan | $66K | +2% | 9,420 |
| South Carolina | $65K | +2% | 870 |
| Iowa | $65K | +1% | 760 |
| Alabama | $65K | +1% | 690 |
| Virginia | $64K | +0% | 390 |
| Florida | $64K | -0% | 440 |
| Colorado | $64K | -0% | 160 |
| Rhode Island | $63K | -1% | 260 |
| Ohio | $62K | -3% | 5,520 |
| Nevada | $61K | -4% | 220 |
| Illinois | $61K | -4% | 5,220 |
| Pennsylvania | $61K | -5% | 3,380 |
| North Carolina | $61K | -5% | 1,580 |
| Missouri | $61K | -5% | 1,280 |
| Tennessee | $61K | -5% | 2,930 |
| Georgia | $60K | -6% | 850 |
| South Dakota | $60K | -7% | 60 |
| Arizona | $59K | -8% | 310 |
| Maryland | $58K | -9% | 70 |
| Mississippi | $58K | -9% | 300 |
| Idaho | $58K | -10% | 50 |
| Arkansas | $57K | -11% | 290 |
| Utah | $57K | -11% | 270 |
| Texas | $55K | -13% | 1,710 |
| New Mexico | $48K | -25% | 40 |
| Louisiana | $47K | -27% | 170 |
| West Virginia | $46K | -28% | 40 |
Showing 1–10 of 45 states with published data
BLS does not publish data for every state when sample sizes are too small
Track tool and die makers salary changes
BLS updates this data quarterly. We'll email you when Staunton-Stuarts Draft numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a tool and die maker afford a 2BR apartment alone in Staunton-Stuarts Draft?
Yes — at the median salary of $67K, rent takes 28.9% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,261/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for tool and die makers in Staunton-Stuarts Draft?
The 10th-percentile wage — what new tool and die makers typically earn — is $50K/year. Take-home on that works out to about $2,979/month. At HUD’s $1,261/month FMR, rent would take 42% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is tool and die maker a high-paying job in Staunton-Stuarts Draft?
Pay here is roughly in line with the national average — $67K locally vs. $64K nationally, a 5% difference.
How does Staunton-Stuarts Draft compare to the national average for tool and die makers?
Staunton-Stuarts Draft pays $67K median vs. the U.S. average of $64K — that’s +5%. After adjusting for local cost of living (RPP 91.13), the purchasing-power equivalent is $74K — still ahead of the national median.
How much do tool and die makers make in Staunton-Stuarts Draft, VA?
The median is $67,130 a year, that works out to about $32 an hour. But the range is wide: entry-level workers start around $49,650, and experienced tool and die makers can clear $73,720. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $67K enough to live in Staunton-Stuarts Draft?
On that salary, you'd take home roughly $4,356/month after taxes. A 2-bedroom here rents for about $1,261/month, which eats 28.9% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a tool and die makers salary go in Staunton-Stuarts Draft?
Staunton-Stuarts Draft has a Regional Price Parity of 91.13 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median tool and die makers salary is worth about $73,664 in national-average purchasing power.
Where do tool and die makers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.