Calibration Technologists and Technicians Salary in Dayton-Kettering-Beavercreek, OH
Calibration Technologists and Technicians in Dayton-Kettering-Beavercreek, OH make a median of $58,240 a year, or about $28 an hour. The range runs from $44K at the entry level to $74K for experienced workers. Cost of living is below average (RPP 92.69), which stretches that salary to about $62,833 in buying power. A 2-bedroom apartment runs $1,273/month — about 33.3% of take-home, which is tight.
So what does $58K get you in Dayton-Kettering-Beavercreek?
Groceries, utilities, transportation, and healthcare scaled from national averages by Dayton-Kettering-Beavercreek’s Regional Price Parity (92.69). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About calibration technologists and technicians
Sponsored links — AffordMap may earn a commission at no cost to you. Learn more
Compensation breakdown
Annual earnings by percentile, Dayton-Kettering-Beavercreek, OH
Entry-level calibration technologists and technicians (10th percentile) start around $44K. Mid-career wages sit at $58K. Top earners bring in $74K or more, a $30K spread from bottom to top.
Calibration Technologists and Technicians pay across states
Median income ranked highest to lowest, compared to the national figure
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| New Jersey | $95K | +46% | 310 |
| Washington | $88K | +35% | 250 |
| Arizona | $83K | +27% | 440 |
| Oregon | $77K | +19% | 100 |
| Rhode Island | $77K | +18% | 30 |
| New Mexico | $72K | +10% | 150 |
| Virginia | $71K | +9% | 300 |
| Michigan | $70K | +8% | 450 |
| California | $70K | +7% | 1,320 |
| Illinois | $68K | +5% | 180 |
| Vermont | $67K | +4% | 40 |
| Tennessee | $66K | +2% | 330 |
| Utah | $66K | +1% | N/A |
| New Hampshire | $65K | -0% | 220 |
| Georgia | $65K | -1% | 230 |
| Connecticut | $64K | -1% | 90 |
| Texas | $64K | -1% | 3,680 |
| Indiana | $64K | -1% | 460 |
| Idaho | $64K | -2% | 40 |
| Mississippi | $63K | -3% | 30 |
| Arkansas | $63K | -3% | 150 |
| North Carolina | $63K | -3% | 470 |
| Massachusetts | $63K | -4% | 310 |
| Ohio | $63K | -4% | 570 |
| South Carolina | $62K | -4% | 70 |
| Florida | $62K | -5% | 850 |
| Pennsylvania | $62K | -5% | 690 |
| Nevada | $60K | -7% | 140 |
| New York | $60K | -8% | 650 |
| Oklahoma | $60K | -8% | 80 |
| Nebraska | $60K | -8% | 200 |
| Maryland | $58K | -11% | 440 |
| Minnesota | $58K | -11% | 370 |
| Missouri | $55K | -15% | 140 |
| Kentucky | $54K | -17% | 170 |
| Wisconsin | $47K | -28% | 120 |
| Alabama | $40K | -38% | 50 |
Showing 1–10 of 37 states
BLS does not publish data for every state when sample sizes are too small
Track calibration technologists and technicians salary changes
BLS updates this data quarterly. We'll email you when Dayton-Kettering-Beavercreek numbers change.
Related careers in Engineering
Frequently asked questions
How much do calibration technologists and technicians make in Dayton-Kettering-Beavercreek, OH?
The median is $58,240 a year, that works out to about $28 an hour. But the range is wide: entry-level workers start around $43,650, and experienced calibration technologists and technicians can clear $73,570. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $58K enough to live in Dayton-Kettering-Beavercreek?
On that salary, you'd take home roughly $3,995/month after taxes. A 2-bedroom here rents for about $1,273/month, which eats 31.9% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a calibration technologists and technicians salary go in Dayton-Kettering-Beavercreek?
Dayton-Kettering-Beavercreek has a Regional Price Parity of 92.69 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median calibration technologists and technicians salary is worth about $62,833 in national-average purchasing power.
Where do calibration technologists and technicians get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.