Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers Salary
In Iowa, electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn $44,880 at the median, or about $21.58 an hour. The range runs from $38K at the entry level to $61K for experienced workers. Cost of living is below average (RPP 88.86), which stretches that salary to about $50,506 in buying power. A 2-bedroom apartment runs $1,064/month, about 34.8% of take-home, which is tight.
Statewide average. Salary and cost of living vary significantly across Iowa. Jump to a metro for precise data:
So what does $45K get you in Iowa?
About electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Iowa
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers pay in Iowa tracks closely to the national median, $45K locally vs. $46K nationwide, a 2% difference. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,064/month, which is 35.5% of the median worker's take-home, past the 30% guideline most planners use. Regional Price Parity sits at 88.86 (national = 100), meaning everyday costs run about 11% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compensation breakdown
Annual earnings by percentile, Iowa
Entry-level electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers (10th percentile) start around $38K. Mid-career wages sit at $45K. Top earners bring in $61K or more, a $23K spread from bottom to top.
Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers salary by metro in Iowa
6 metro areas with BLS data, ranked by median pay
| Metro area | Median salary | vs. state | Employment |
|---|---|---|---|
| Davenport-Moline-Rock Island | $49K | +9% | 260 |
| Dubuque | $46K | +2% | 90 |
| Waterloo-Cedar Falls | $44K | -2% | 70 |
| Cedar Rapids | $44K | -2% | 1,680 |
| Des Moines-West Des Moines | $44K | -3% | 350 |
| Ames | $39K | -13% | 90 |
Compare to other states
Track electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary changes
BLS updates this data quarterly. We'll email you when Iowa numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher afford a 2BR apartment alone in Iowa?
It’s a stretch — at the median salary of $45K, rent takes 35.5% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,064/month. The 30% guideline puts the comfortable ceiling at roughly $900/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers in Iowa?
The 10th-percentile wage — what new electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers typically earn — is $38K/year. Take-home on that works out to about $2,297/month. At HUD’s $1,064/month FMR, rent would take 46% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher a high-paying job in Iowa?
Pay here is roughly in line with the national average — $45K locally vs. $46K nationally, a 2% difference.
How does Iowa compare to the national average for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers?
Iowa pays $45K median vs. the U.S. average of $46K — that’s -2%. After adjusting for local cost of living (RPP 88.86), the purchasing-power equivalent is $51K — still ahead of the national median.
How much do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers make in Iowa?
The median is $44,880 a year, that works out to about $22 an hour. But the range is wide: entry-level workers start around $38,290, and experienced electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers can clear $61,360. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $45K enough to live in Iowa?
On that salary, you'd take home roughly $2,997/month after taxes. A 2-bedroom here rents for about $1,064/month, which eats 35.5% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary go in Iowa?
Iowa has a Regional Price Parity of 88.86 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary is worth about $50,506 in national-average purchasing power.
Where do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.