Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers Salary
In North Dakota, electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn $42,790 at the median, or about $20.57 an hour. The range runs from $36K at the entry level to $52K for experienced workers. Cost of living is below average (RPP 88.89), which stretches that salary to about $48,138 in buying power. A 2-bedroom apartment runs $1,034/month, about 34.8% of take-home, which is tight.
Statewide average. Salary and cost of living vary significantly across North Dakota. Jump to a metro for precise data:
So what does $43K get you in North Dakota?
About electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in North Dakota
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers pay in North Dakota tracks closely to the national median, $43K locally vs. $46K nationwide, a 7% difference. Rent runs $1,034/month for a 2-bedroom (HUD FMR), taking 34.9% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 88.89 (national = 100), meaning everyday costs run about 11% cheaper here. Your dollar stretches further than the headline salary suggests. Pay and costs are both near average, leaving limited margin for savings at the median wage.
Compensation breakdown
Annual earnings by percentile, North Dakota
Entry-level electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers (10th percentile) start around $36K. Mid-career wages sit at $43K. Top earners bring in $52K or more, a $16K spread from bottom to top.
Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers salary by metro in North Dakota
1 metro area with BLS data, ranked by median pay
| Metro area | Median salary | vs. state | Employment |
|---|---|---|---|
| Fargo | $45K | +4% | 290 |
Compare to other states
Track electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary changes
BLS updates this data quarterly. We'll email you when North Dakota numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher afford a 2BR apartment alone in North Dakota?
It’s a stretch — at the median salary of $43K, rent takes 34.9% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,034/month. The 30% guideline puts the comfortable ceiling at roughly $900/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers in North Dakota?
The 10th-percentile wage — what new electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers typically earn — is $36K/year. Take-home on that works out to about $2,146/month. At HUD’s $1,034/month FMR, rent would take 48% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher a high-paying job in North Dakota?
Pay here is roughly in line with the national average — $43K locally vs. $46K nationally, a 7% difference.
How does North Dakota compare to the national average for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers?
North Dakota pays $43K median vs. the U.S. average of $46K — that’s -7%. After adjusting for local cost of living (RPP 88.89), the purchasing-power equivalent is $48K — still ahead of the national median.
How much do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers make in North Dakota?
The median is $42,790 a year, that works out to about $21 an hour. But the range is wide: entry-level workers start around $35,760, and experienced electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers can clear $51,850. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $43K enough to live in North Dakota?
On that salary, you'd take home roughly $2,966/month after taxes. A 2-bedroom here rents for about $1,034/month, which eats 34.9% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary go in North Dakota?
North Dakota has a Regional Price Parity of 88.89 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary is worth about $48,138 in national-average purchasing power.
Where do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.