Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic Salary
In Lincoln, NE, extruding and drawing machine setters, operators, and tenders, metal and plastics earn $61,570 at the median, or about $29.6 an hour. The range runs from $39K at the entry level to $63K for experienced workers. Cost of living is below average (RPP 91.58), which stretches that salary to about $67,231 in buying power. Rent on a 2-bedroom averages $1,141/month, or 28.2% of estimated take-home pay.
Where the paycheck goes
What $62K actually covers in Lincoln, month by month
Groceries, utilities, transportation, and healthcare scaled from national averages by Lincoln’s Regional Price Parity (91.58). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About extruding and drawing machine setters, operators, and tenders, metal and plastics
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Lincoln
Lincoln sits well above the national pay line for extruding and drawing machine setters, operators, and tenders, metal and plastic, local pay runs about 29% higher than the U.S. median of $48K. Rent runs $1,141/month for a 2-bedroom (HUD FMR), taking 27.9% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 91.58 (national = 100), meaning everyday costs run about 8% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for extruding and drawing machine setters, operators, and tenders, metal and plastics in metros near Lincoln, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| St. Louis | $55K | $57K |
| Kansas City | $49K | $53K |
| Wichita | $40K | $45K |
| Denver-Aurora-Centennial | $46K | , |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Lincoln, NE
Entry-level extruding and drawing machine setters, operators, and tenders, metal and plastics (10th percentile) start around $39K. Mid-career wages sit at $62K. Top earners bring in $63K or more, a $24K spread from bottom to top.
Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic pay across states
Median income ranked highest to lowest, compared to the national figure
View Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Rhode Island | $61K | +29% | 430 |
| Vermont | $59K | +24% | 60 |
| North Carolina | $53K | +12% | 2,950 |
| Nebraska | $52K | +10% | 510 |
| Minnesota | $52K | +9% | 900 |
| New Jersey | $51K | +7% | 750 |
| Pennsylvania | $51K | +7% | 2,960 |
| Colorado | $51K | +7% | 240 |
| Massachusetts | $50K | +6% | 1,490 |
| Connecticut | $50K | +5% | 1,000 |
| Wisconsin | $50K | +5% | 3,190 |
| New Hampshire | $50K | +5% | 580 |
| Arkansas | $50K | +5% | 1,270 |
| Kentucky | $50K | +5% | 1,400 |
| Oregon | $50K | +4% | 440 |
| South Dakota | $50K | +4% | 50 |
| Indiana | $49K | +4% | 3,740 |
| South Carolina | $49K | +3% | 2,000 |
| Utah | $49K | +3% | 410 |
| New York | $49K | +3% | 1,400 |
| Illinois | $49K | +2% | 2,750 |
| Georgia | $48K | +1% | 2,560 |
| Louisiana | $48K | +0% | 580 |
| Alabama | $48K | -0% | 1,200 |
| Tennessee | $48K | -0% | 2,980 |
| Iowa | $47K | -1% | 450 |
| Washington | $47K | -1% | 1,080 |
| Maryland | $47K | -2% | 270 |
| Maine | $47K | -2% | 90 |
| Ohio | $46K | -3% | 5,020 |
| Kansas | $46K | -3% | 1,140 |
| Delaware | $46K | -3% | 470 |
| Missouri | $46K | -3% | 1,040 |
| Wyoming | $46K | -4% | 80 |
| Texas | $46K | -4% | 4,070 |
| California | $46K | -4% | 3,870 |
| New Mexico | $46K | -4% | 50 |
| Virginia | $45K | -5% | 1,490 |
| Michigan | $45K | -5% | 1,800 |
| Arizona | $45K | -6% | 910 |
| West Virginia | $45K | -7% | 540 |
| Mississippi | $44K | -7% | 550 |
| Nevada | $44K | -7% | 260 |
| Florida | $40K | -17% | 1,190 |
| Oklahoma | $39K | -19% | 490 |
| Idaho | $35K | -27% | N/A |
Showing 1–10 of 46 states with published data
BLS does not publish data for every state when sample sizes are too small
Track extruding and drawing machine setters, operators, and tenders, metal and plastic salary changes
BLS updates this data annually. We'll email you when Lincoln numbers change.
Related careers in Production & Manufacturing
Quick answers
The stuff people actually ask about this job
Can a extruding and drawing machine setters, operators, and tenders, metal and plastic afford a 2BR apartment alone in Lincoln?
Yes — at the median salary of $62K, rent takes 27.9% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,141/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for extruding and drawing machine setters, operators, and tenders, metal and plastics in Lincoln?
The 10th-percentile wage — what new extruding and drawing machine setters, operators, and tenders, metal and plastics typically earn — is $39K/year. Take-home on that works out to about $2,657/month. At HUD’s $1,141/month FMR, rent would take 43% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is extruding and drawing machine setters, operators, and tenders, metal and plastic a high-paying job in Lincoln?
Local pay is 29% above the national median — $62K here vs. $48K nationally.
How does Lincoln compare to the national average for extruding and drawing machine setters, operators, and tenders, metal and plastics?
Lincoln pays $62K median vs. the U.S. average of $48K — that’s +29%. After adjusting for local cost of living (RPP 91.58), the purchasing-power equivalent is $67K — still ahead of the national median.
How much do extruding and drawing machine setters, operators, and tenders, metal and plastics make in Lincoln, NE?
The median is $61,570 a year, that works out to about $30 an hour. But the range is wide: entry-level workers start around $38,590, and experienced extruding and drawing machine setters, operators, and tenders, metal and plastics can clear $62,660. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $62K enough to live in Lincoln?
On that salary, you'd take home roughly $4,087/month after taxes. A 2-bedroom here rents for about $1,141/month, which eats 27.9% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a extruding and drawing machine setters, operators, and tenders, metal and plastic salary go in Lincoln?
Lincoln has a Regional Price Parity of 91.58 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median extruding and drawing machine setters, operators, and tenders, metal and plastic salary is worth about $67,231 in national-average purchasing power.
Where do extruding and drawing machine setters, operators, and tenders, metal and plastics get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.