Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic Salary
In St. Louis, MO-IL, extruding and drawing machine setters, operators, and tenders, metal and plastics earn $54,610 at the median, or about $26.25 an hour. The range runs from $38K at the entry level to $81K for experienced workers. Adjusted for local prices (RPP 95.09), that's roughly $57,430 in purchasing power. A 2-bedroom apartment runs $1,218/month, about 33.9% of take-home, which is tight.
So what does $55K get you in St. Louis?
Groceries, utilities, transportation, and healthcare scaled from national averages by St. Louis’s Regional Price Parity (95.09). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About extruding and drawing machine setters, operators, and tenders, metal and plastics
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in St. Louis
St. Louis sits well above the national pay line for extruding and drawing machine setters, operators, and tenders, metal and plastic, local pay runs about 14% higher than the U.S. median of $48K. Rent runs $1,218/month for a 2-bedroom (HUD FMR), taking 33.1% of the median take-home. That's within the 30% rule, though not by much. Cost of living (RPP 95.09) is near the national average, so spending patterns here track the typical American budget fairly closely. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for extruding and drawing machine setters, operators, and tenders, metal and plastics in metros near St. Louis, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Kansas City | $49K | $53K |
| St. Joseph | $36K | $41K |
| Springfield | $36K | $41K |
| Chicago-Naperville-Elgin | $49K | $47K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, St. Louis, MO-IL
Entry-level extruding and drawing machine setters, operators, and tenders, metal and plastics (10th percentile) start around $38K. Mid-career wages sit at $55K. Top earners bring in $81K or more, a $43K spread from bottom to top.
Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic pay across states
Median income ranked highest to lowest, compared to the national figure
View Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Rhode Island | $61K | +29% | 430 |
| Vermont | $59K | +24% | 60 |
| North Carolina | $53K | +12% | 2,950 |
| Nebraska | $52K | +10% | 510 |
| Minnesota | $52K | +9% | 900 |
| New Jersey | $51K | +7% | 750 |
| Pennsylvania | $51K | +7% | 2,960 |
| Colorado | $51K | +7% | 240 |
| Massachusetts | $50K | +6% | 1,490 |
| Connecticut | $50K | +5% | 1,000 |
| Wisconsin | $50K | +5% | 3,190 |
| New Hampshire | $50K | +5% | 580 |
| Arkansas | $50K | +5% | 1,270 |
| Kentucky | $50K | +5% | 1,400 |
| Oregon | $50K | +4% | 440 |
| South Dakota | $50K | +4% | 50 |
| Indiana | $49K | +4% | 3,740 |
| South Carolina | $49K | +3% | 2,000 |
| Utah | $49K | +3% | 410 |
| New York | $49K | +3% | 1,400 |
| Illinois | $49K | +2% | 2,750 |
| Georgia | $48K | +1% | 2,560 |
| Louisiana | $48K | +0% | 580 |
| Alabama | $48K | -0% | 1,200 |
| Tennessee | $48K | -0% | 2,980 |
| Iowa | $47K | -1% | 450 |
| Washington | $47K | -1% | 1,080 |
| Maryland | $47K | -2% | 270 |
| Maine | $47K | -2% | 90 |
| Ohio | $46K | -3% | 5,020 |
| Kansas | $46K | -3% | 1,140 |
| Delaware | $46K | -3% | 470 |
| Missouri | $46K | -3% | 1,040 |
| Wyoming | $46K | -4% | 80 |
| Texas | $46K | -4% | 4,070 |
| California | $46K | -4% | 3,870 |
| New Mexico | $46K | -4% | 50 |
| Virginia | $45K | -5% | 1,490 |
| Michigan | $45K | -5% | 1,800 |
| Arizona | $45K | -6% | 910 |
| West Virginia | $45K | -7% | 540 |
| Mississippi | $44K | -7% | 550 |
| Nevada | $44K | -7% | 260 |
| Florida | $40K | -17% | 1,190 |
| Oklahoma | $39K | -19% | 490 |
| Idaho | $35K | -27% | N/A |
Showing 1–10 of 46 states with published data
BLS does not publish data for every state when sample sizes are too small
Track extruding and drawing machine setters, operators, and tenders, metal and plastic salary changes
BLS updates this data quarterly. We'll email you when St. Louis numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a extruding and drawing machine setters, operators, and tenders, metal and plastic afford a 2BR apartment alone in St. Louis?
It’s a stretch — at the median salary of $55K, rent takes 33.1% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,218/month. The 30% guideline puts the comfortable ceiling at roughly $1,100/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for extruding and drawing machine setters, operators, and tenders, metal and plastics in St. Louis?
The 10th-percentile wage — what new extruding and drawing machine setters, operators, and tenders, metal and plastics typically earn — is $38K/year. Take-home on that works out to about $2,293/month. At HUD’s $1,218/month FMR, rent would take 53% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is extruding and drawing machine setters, operators, and tenders, metal and plastic a high-paying job in St. Louis?
Local pay is 14% above the national median — $55K here vs. $48K nationally.
How does St. Louis compare to the national average for extruding and drawing machine setters, operators, and tenders, metal and plastics?
St. Louis pays $55K median vs. the U.S. average of $48K — that’s +14%. After adjusting for local cost of living (RPP 95.09), the purchasing-power equivalent is $57K — still ahead of the national median.
How much do extruding and drawing machine setters, operators, and tenders, metal and plastics make in St. Louis, MO-IL?
The median is $54,610 a year, that works out to about $26 an hour. But the range is wide: entry-level workers start around $38,210, and experienced extruding and drawing machine setters, operators, and tenders, metal and plastics can clear $80,970. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $55K enough to live in St. Louis?
On that salary, you'd take home roughly $3,676/month after taxes. A 2-bedroom here rents for about $1,218/month, which eats 33.1% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a extruding and drawing machine setters, operators, and tenders, metal and plastic salary go in St. Louis?
St. Louis has a Regional Price Parity of 95.09 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median extruding and drawing machine setters, operators, and tenders, metal and plastic salary is worth about $57,430 in national-average purchasing power.
Where do extruding and drawing machine setters, operators, and tenders, metal and plastics get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.