Tool Grinders, Filers, and Sharpeners Salary
In Dayton-Kettering-Beavercreek, OH, tool grinders, filers, and sharpeners earn $64,350 at the median, or about $30.94 an hour. The range runs from $43K at the entry level to $65K for experienced workers. Cost of living is below average (RPP 92.69), which stretches that salary to about $69,425 in buying power. A 2-bedroom apartment runs $1,273/month, about 30.1% of take-home, which is tight.
So what does $64K get you in Dayton-Kettering-Beavercreek?
Groceries, utilities, transportation, and healthcare scaled from national averages by Dayton-Kettering-Beavercreek’s Regional Price Parity (92.69). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About tool grinders, filers, and sharpeners
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in Dayton-Kettering-Beavercreek
Dayton-Kettering-Beavercreek sits well above the national pay line for tool grinders, filers, and sharpeners, local pay runs about 29% higher than the U.S. median of $50K. Rent runs $1,273/month for a 2-bedroom (HUD FMR), taking 29.1% of the median take-home. That's within the 30% rule, though not by much. Regional Price Parity sits at 92.69 (national = 100), meaning everyday costs run about 7% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compared to nearby metros
Median pay for tool grinders, filers, and sharpeners in metros near Dayton-Kettering-Beavercreek, adjusted for local cost of living.
| Metro | Median pay | COL-adjusted |
|---|---|---|
| Cincinnati | $44K | $46K |
| Grand Rapids-Wyoming-Kentwood | $43K | $45K |
| Philadelphia-Camden-Wilmington | $44K | $43K |
COL-adjusted = median salary ÷ (BEA Regional Price Parity ÷ 100). Expresses purchasing power in national-average dollars.
Compensation breakdown
Annual earnings by percentile, Dayton-Kettering-Beavercreek, OH
Entry-level tool grinders, filers, and sharpeners (10th percentile) start around $43K. Mid-career wages sit at $64K. Top earners bring in $65K or more, a $23K spread from bottom to top.
Tool Grinders, Filers, and Sharpeners pay across states
Median income ranked highest to lowest, compared to the national figure
View Tool Grinders, Filers, and Sharpeners salary in all states
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Washington | $75K | +50% | 410 |
| Oregon | $61K | +21% | 430 |
| Idaho | $59K | +18% | 100 |
| Ohio | $57K | +13% | 190 |
| Massachusetts | $57K | +13% | 40 |
| Louisiana | $56K | +13% | 40 |
| Mississippi | $56K | +11% | 50 |
| Kansas | $54K | +8% | N/A |
| Missouri | $53K | +5% | 150 |
| Minnesota | $52K | +4% | 90 |
| Iowa | $52K | +3% | 60 |
| California | $51K | +2% | 620 |
| Wisconsin | $51K | +2% | 110 |
| South Carolina | $50K | +0% | 80 |
| Montana | $50K | -1% | N/A |
| New Jersey | $49K | -1% | N/A |
| Indiana | $49K | -3% | 110 |
| Nebraska | $47K | -5% | 40 |
| New York | $47K | -6% | 170 |
| Georgia | $47K | -7% | 240 |
| Maine | $47K | -7% | 60 |
| New Hampshire | $46K | -7% | 40 |
| Texas | $46K | -8% | 530 |
| North Carolina | $46K | -9% | 160 |
| Oklahoma | $46K | -9% | 60 |
| Kentucky | $44K | -12% | 50 |
| Michigan | $43K | -13% | 260 |
| Alabama | $42K | -17% | 220 |
| Connecticut | $40K | -21% | 130 |
| Pennsylvania | $40K | -21% | 170 |
| Arkansas | $38K | -23% | 160 |
| Virginia | $38K | -23% | 80 |
| Tennessee | $37K | -26% | 200 |
| Florida | $37K | -26% | 120 |
| Colorado | $34K | -32% | N/A |
Showing 1–10 of 35 states with published data
BLS does not publish data for every state when sample sizes are too small
Track tool grinders, filers, and sharpeners salary changes
BLS updates this data quarterly. We'll email you when Dayton-Kettering-Beavercreek numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a tool grinders, filers, and sharpener afford a 2BR apartment alone in Dayton-Kettering-Beavercreek?
Yes — at the median salary of $64K, rent takes 29.1% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,273/month. That stays under the 30% guideline most financial planners use.
What’s the entry-level salary for tool grinders, filers, and sharpeners in Dayton-Kettering-Beavercreek?
The 10th-percentile wage — what new tool grinders, filers, and sharpeners typically earn — is $43K/year. Take-home on that works out to about $2,553/month. At HUD’s $1,273/month FMR, rent would take 50% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is tool grinders, filers, and sharpener a high-paying job in Dayton-Kettering-Beavercreek?
Local pay is 29% above the national median — $64K here vs. $50K nationally.
How does Dayton-Kettering-Beavercreek compare to the national average for tool grinders, filers, and sharpeners?
Dayton-Kettering-Beavercreek pays $64K median vs. the U.S. average of $50K — that’s +29%. After adjusting for local cost of living (RPP 92.69), the purchasing-power equivalent is $69K — still ahead of the national median.
How much do tool grinders, filers, and sharpeners make in Dayton-Kettering-Beavercreek, OH?
The median is $64,350 a year, that works out to about $31 an hour. But the range is wide: entry-level workers start around $42,550, and experienced tool grinders, filers, and sharpeners can clear $65,270. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $64K enough to live in Dayton-Kettering-Beavercreek?
On that salary, you'd take home roughly $4,382/month after taxes. A 2-bedroom here rents for about $1,273/month, which eats 29.1% of your paycheck. That's under the 30% guideline most financial planners use, so the numbers work.
How far does a tool grinders, filers, and sharpeners salary go in Dayton-Kettering-Beavercreek?
Dayton-Kettering-Beavercreek has a Regional Price Parity of 92.69 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median tool grinders, filers, and sharpeners salary is worth about $69,425 in national-average purchasing power.
Where do tool grinders, filers, and sharpeners get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.