Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers Salary
In North Carolina, electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn $45,080 at the median, or about $21.68 an hour. The range runs from $30K at the entry level to $59K for experienced workers. Cost of living is below average (RPP 92.66), which stretches that salary to about $48,651 in buying power. A 2-bedroom apartment runs $1,284/month, about 41% of take-home, which is tight.
Statewide average. Salary and cost of living vary significantly across North Carolina. Jump to a metro for precise data:
So what does $45K get you in North Carolina?
About electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers
Sponsored links, AffordMap may earn a commission at no cost to you. Learn more
What this looks like in North Carolina
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers pay in North Carolina tracks closely to the national median, $45K locally vs. $46K nationwide, a 2% difference. The catch: housing math doesn't keep up. A 2-bedroom at the HUD median rents for $1,284/month, which is 42.5% of the median worker's take-home, past the 30% guideline most planners use. Regional Price Parity sits at 92.66 (national = 100), meaning everyday costs run about 7% cheaper here. Your dollar stretches further than the headline salary suggests. Use the affordability calculator above to model your specific situation.
Compensation breakdown
Annual earnings by percentile, North Carolina
Entry-level electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers (10th percentile) start around $30K. Mid-career wages sit at $45K. Top earners bring in $59K or more, a $30K spread from bottom to top.
Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers salary by metro in North Carolina
9 metro areas with BLS data, ranked by median pay
| Metro area | Median salary | vs. state | Employment |
|---|---|---|---|
| Hickory-Lenoir-Morganton | $48K | +6% | 1,340 |
| Greensboro-High Point | $47K | +4% | 970 |
| Winston-Salem | $46K | +2% | 210 |
| Raleigh-Cary | $45K | +0% | 780 |
| Asheville | $45K | -1% | 850 |
| Durham-Chapel Hill | $44K | -3% | 460 |
| Charlotte-Concord-Gastonia | $43K | -5% | 830 |
| Rocky Mount | $38K | -16% | N/A |
| Wilmington | $36K | -19% | 40 |
Compare to other states
Track electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary changes
BLS updates this data quarterly. We'll email you when North Carolina numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
Can a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher afford a 2BR apartment alone in North Carolina?
It’s a stretch — at the median salary of $45K, rent takes 42.5% of take-home pay. A 2-bedroom at the HUD Fair Market Rent runs $1,284/month. The 30% guideline puts the comfortable ceiling at roughly $900/month in rent — so roommates or a 1-bedroom would ease the math significantly.
What’s the entry-level salary for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers in North Carolina?
The 10th-percentile wage — what new electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers typically earn — is $30K/year. Take-home on that works out to about $1,776/month. At HUD’s $1,284/month FMR, rent would take 72% of that take-home — above the 30% guideline, so a 1-bedroom or shared housing is likely necessary starting out.
Is electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher a high-paying job in North Carolina?
Pay here is roughly in line with the national average — $45K locally vs. $46K nationally, a 2% difference.
How does North Carolina compare to the national average for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers?
North Carolina pays $45K median vs. the U.S. average of $46K — that’s -2%. After adjusting for local cost of living (RPP 92.66), the purchasing-power equivalent is $49K — still ahead of the national median.
How much do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers make in North Carolina?
The median is $45,080 a year, that works out to about $22 an hour. But the range is wide: entry-level workers start around $29,600, and experienced electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers can clear $59,180. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $45K enough to live in North Carolina?
On that salary, you'd take home roughly $3,019/month after taxes. A 2-bedroom here rents for about $1,284/month, which eats 42.5% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary go in North Carolina?
North Carolina has a Regional Price Parity of 92.66 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary is worth about $48,651 in national-average purchasing power.
Where do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.