Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers Salary in Durham-Chapel Hill, NC
In Durham-Chapel Hill, NC, electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn $46,000 at the median — $22.12 an hour. The range runs from $35K at the entry level to $59K for experienced workers. Adjusted for local prices (RPP 97.57), that's roughly $47,146 in purchasing power. A 2-bedroom apartment runs $1,711/month — about 53.6% of take-home, which is tight.
So what does $46K get you in Durham-Chapel Hill?
Groceries, utilities, transportation, and healthcare scaled from national averages by Durham-Chapel Hill’s Regional Price Parity (97.57). Rent from HUD Fair Market Rents. Taxes estimated for single filer, standard deduction. * Healthcare is the employee-paid share only (premiums + out-of-pocket). Actual costs vary by coverage type: employer-sponsored, ACA marketplace, or uninsured.
About electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers
Sponsored links — AffordMap may earn a commission at no cost to you. Learn more
Compensation breakdown
Annual earnings by percentile, Durham-Chapel Hill, NC
Entry-level electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers (10th percentile) start around $35K. Mid-career wages sit at $46K. Top earners bring in $59K or more, a $24K spread from bottom to top.
Electrical, Electronic, and Electromechanical Assemblers, Except Coil Winders, Tapers, and Finishers pay across states
Median income ranked highest to lowest, compared to the national figure
| State | Median salary | vs. national | Employment |
|---|---|---|---|
| Maryland | $51K | +16% | 1,250 |
| Washington | $50K | +15% | 7,280 |
| Massachusetts | $48K | +8% | 11,030 |
| Vermont | $48K | +8% | 610 |
| New Hampshire | $47K | +7% | 3,560 |
| California | $47K | +6% | 38,580 |
| Oregon | $47K | +6% | 3,090 |
| Minnesota | $46K | +5% | 6,760 |
| Ohio | $46K | +4% | 14,260 |
| Maine | $46K | +4% | 660 |
| Wisconsin | $45K | +3% | 10,310 |
| Michigan | $45K | +2% | 11,180 |
| Utah | $45K | +2% | 2,810 |
| Montana | $45K | +2% | 210 |
| Iowa | $44K | +1% | 3,290 |
| New York | $44K | -0% | 13,270 |
| Connecticut | $44K | -0% | 3,390 |
| Arizona | $43K | -2% | 5,130 |
| Pennsylvania | $43K | -2% | 12,600 |
| Oklahoma | $43K | -2% | 2,720 |
| Rhode Island | $43K | -2% | 1,070 |
| Idaho | $43K | -3% | 1,020 |
| Missouri | $43K | -3% | 5,260 |
| South Carolina | $42K | -4% | 3,820 |
| Kentucky | $42K | -4% | 2,020 |
| Arkansas | $42K | -4% | 1,910 |
| North Carolina | $42K | -5% | 7,160 |
| North Dakota | $41K | -6% | 440 |
| Virginia | $41K | -6% | 4,840 |
| Georgia | $41K | -7% | 5,480 |
| Texas | $40K | -9% | 16,470 |
| New Jersey | $40K | -9% | 7,350 |
| Tennessee | $40K | -9% | 1,640 |
| Illinois | $40K | -9% | 14,660 |
| Indiana | $40K | -10% | 6,700 |
| Wyoming | $39K | -11% | 100 |
| Nevada | $39K | -11% | 940 |
| West Virginia | $39K | -11% | 540 |
| South Dakota | $39K | -12% | 1,610 |
| Kansas | $39K | -12% | 3,570 |
| Nebraska | $38K | -13% | 1,110 |
| Alabama | $38K | -13% | 4,580 |
| Delaware | $38K | -14% | 500 |
| Florida | $38K | -14% | 8,760 |
| Mississippi | $38K | -14% | 2,320 |
| New Mexico | $36K | -17% | 540 |
| Louisiana | $36K | -19% | 410 |
Showing 1–10 of 47 states
BLS does not publish data for every state when sample sizes are too small
Track electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary changes
BLS updates this data quarterly. We'll email you when Durham-Chapel Hill numbers change.
Related careers in Production & Manufacturing
Frequently asked questions
How much do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers make in Durham-Chapel Hill, NC?
The median is $46,000 a year, that works out to about $22 an hour. But the range is wide: entry-level workers start around $34,730, and experienced electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers can clear $58,700. These are BLS numbers, based on employer-reported data, not self-reported surveys.
Is $46K enough to live in Durham-Chapel Hill?
On that salary, you'd take home roughly $3,077/month after taxes. A 2-bedroom here rents for about $1,711/month, which eats 55.6% of your paycheck. That's above the 30% rule of thumb, housing will be a stretch at the median salary, though you can manage with roommates or a smaller place.
How far does a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary go in Durham-Chapel Hill?
Durham-Chapel Hill has a Regional Price Parity of 97.57 (100 is the national average). That's below average, your money stretches further here than the raw salary number suggests. After cost-of-living adjustment, the median electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers salary is worth about $47,146 in national-average purchasing power.
Where do electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers get paid the most?
The table above ranks every state by median pay for this role. Keep in mind that the highest-paying states tend to have the highest costs of living, so the top salary doesn't always mean the most money in your pocket.